Home Network Community > Deco > I have three Deco XE75 Pro's. One has a newer firmware version.
< Deco

I have three Deco XE75 Pro's. One has a newer firmware version.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

I have three Deco XE75 Pro's. One has a newer firmware version.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have three Deco XE75 Pro's. One has a newer firmware version.
I have three Deco XE75 Pro's. One has a newer firmware version.
2023-11-13 13:03:09
Tags: #Firmware Update
Model: Deco XE75 Pro  
Hardware Version:
Firmware Version: 1.2.2 / 1.2.4

Hi,

 

I bought two Deco XE75 Pro's. Then I found out I needed another one and bought a singel unit. When I was looking at firmware on the units the last one I bought has newer firmware than the two I bought a couple of months ago. When I check for updates there's none. How come? See screenshot below.Two has firmware 1.2.2 while one has 1.2.4

 

be2e558105d34e2db9448b6fb0ca1e09

  1      
 
  1      
 
#1
Options
3 Reply
Re:I have three Deco XE75 Pro's. One has a newer firmware version.
2023-11-17 07:51:48

  @cdysthe 

Hi, Thank you very much for your time and patience.

I haven't seen the 1.2.4 firmware elsewhere either. 1.2.2 Build 20230601 Rel. 66771 is the latest official firmware for Deco XE75 Pro V2.

And I checked with the engineer earlier. He did mention that, when a new patch of products is ready, they will be flashed to the current latest firmware. Sometimes, In order to sort out this new patch, a slight change will be made to the build version numbers but actually, they are the same software.

So if 1.2.4 is the factory firmware since you purchased the single-pack Deco XE75 Pro, and you haven't updated to any other firmware since then. I think your case might be like this. 

Are you having any issues with the 1.2.4 firmware?

Thanks a lot and best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:I have three Deco XE75 Pro's. One has a newer firmware version.
2023-11-17 15:01:39 - last edited 2023-11-17 15:02:20

  @David-TP No, I do not have any issues. Interestingly enough in the Android app it says all three are on 1.2.2. It's only if I use the web interface I see 1.2.4 on the unit I bought recently.

 

It won't cause issues when the next firmware update comes around that one unit is on a different version than the two others? 

  1  
  1  
#3
Options
Re:I have three Deco XE75 Pro's. One has a newer firmware version.
2023-11-20 08:08:28

  @cdysthe 

Hi, Thanks for the update.

It won't cause any trouble for the future firmware upgrade and both versions will be properly updated.

Thank you again and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1  
  1  
#4
Options

Information

Helpful: 1

Views: 955

Replies: 3

Tags

Firmware Update
Related Articles
 SQM solution for Deco (XE75 pro)
89 0
 Deco Xe75 Pro Firmware 1.2.7 issues
763 2
 Cabling for Deco XE75
162 0
 Wiring Deco XE75 Pro
2351 0
 Deco XE75 SSID for 6E
618 1
 Deco XE75 Pro Speed
1580 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.