Home Network Community > Wi-Fi Routers > BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
< Wi-Fi Routers

BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
2023-06-20 01:08:47
Tags: #Firmware Update #Upload error
Model: Archer BE900  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20230523 rel.35975(5553)

I'm getting an error when trying to downgrade to the previous firmware because the recently released firmware is causing havoc on my 2.4G network. My 2.4G devices are losing connectivity and I know for sure that it's due to the new firmware. I have state of the art internet monitoring systems setup in my home which are my 2 kids! I haven't heard this much crying from them since the last time we went on a family cruise and I failed to purchase an internet pack. I'm guessing that my error is due to a downgrade block. Please let me know if I'm doing something wrong. I work for a technology based company and I'm proficient at reading and following steps, so I have also covered the basic troubleshooting. I have tried multiple browsers, downloaded multiple firmware of the same, and ONLY the current version will work. Also, I have factory reset the router and performed a couple of updates of the same, and only version that would work, just in case I had performed a bad flash. So, if anyone could help on the downgrade or if Tp-link could resolve the 2.4G issue with the current firmware.

  0      
 
  0      
 
#1
Options
6 Reply
Re:BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
2023-06-21 03:27:14

Hello @nunyabiziz 

 

As I can confirm, this 1.1.1 version cannot be downgraded to the previous 1.0.3 version due to significant firmware modifications.

 

Are you saying the 2.4G wireless connection is pretty stable before you upgrade the firmware from 1.0.3 to 1.1.1? Were there any other changes in the network? How many devices are connected to the 2.4G network and will they still see the network when the internet is unavailable?

 

If the 2.4G connection is not stable, please try to modify the 2.4G wireless network settings on the BE900 to avoid some wireless interference, then observe if it will become stable.

 

BTW, how about the two 5G connections, are they stable?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
2023-06-21 04:06:46 - last edited 2023-06-21 04:18:17

  @nunyabiziz hello Kevin_Z

 

The prior firmware wasn't rock solid stable but my 2.4g devices weren't consistently disconnecting from the network as it has on the latest. I have a little more than 100+ devices total, 60 of which are devices on 2.4g. It's a major pain now that my IoT devices keep dropping connectivity. Automated blinds and lights are unable to perform tasks on schedule. What makes this worse is that my blinds in the great room are about 16ft up so it's not a simple task to get to them so I could do a reset to get them back online. I have been dealing with connectivity issues since the 18th. I have made some adjustments to the 2.4g band. I went from 20/40Mhz width to just 20Mhz in hopes of decreasing possible interference. Also disabled airtime fairness to alleviate any device disconnection. There hasn't been any change to my network that I could see that might result in increased wireless interference that wasn't there before. Kinda funny but I had the BE800 but decided to go to the BE900 due to the higher number of connected devices advertised for the latter as it being marketed as the flagship model. Of the 2 routers, the BE800 was the more stable unit. Maybe I have a lemon of a BE900. Sorry I forgot, the 5G seems stable but I had hoped that there would be increase of coverage range with this update. One last thing, does the BE900 support MLO?

  0  
  0  
#3
Options
Re:BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
2023-06-21 07:02:40

@nunyabiziz 

 

Thank you so much for getting back with all the provided details, we appreciate it.

 

I have reported this issue to the development team and they are working on a version of firmware that will allow you to downgrade to the previous version. BTW, I have also escalated your case to our support engineers, and they will help provide the downgrade firmware.

 

Upon waiting for the firmware, can you please be kind of telling me if you're still using the Archer BE800? Or you have replaced it with the BE900 now?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
2023-06-21 13:51:31 - last edited 2023-06-21 13:51:48

@Kevin_Z I have completely replaced the BE800 with BE900.

  0  
  0  
#5
Options
Re:BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
2023-06-25 19:48:04

  @nunyabiziz 

 

Thank you to Kevin_Z and the technical support team from TP-Link with your assistance in providing a solution to my problem. Feedback for firmware 1.1.1, the 2.4G definitely got thumbs down 👎 but the 5G was solid and I didn't noticed any disconnection of the devices on these radios. I'm still looking forward to future performance enhancements to this beast of a router. Coming from the Asus Axe16000 with the Axe11000 as a mesh unit, the BE900 doesn't provide the same coverage and understandably so. It does meet my expectations as a bridge between for my Fiber 5Gig internet and 10GbE home network.

  3  
  3  
#6
Options
Re:BE900(US) Error when trying to downgrade from V1 1.1.1 to V1 1.0.3
2023-06-26 06:00:24

@nunyabiziz 

 

Thank you so much for the update and I'm happy to see the connection becomes stable again.

 

Please don't worry, the developers will continue to analyze why this issue happened and may update the firmware if that is confirmed or addressed.

 

Let me know if there is anything new that comes up or if you have other inquiries. Nice day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1063

Replies: 6

Tags

Firmware Update
Upload error
Related Articles
 BE900 - 2.4GHz problems
1039 0
 BE900 New Firmware Static IP Fails Operation
261 0
 Fiber Module for Archer BE900
433 0
 Extending coverage for BE900 via a satellite
327 1
 Wi-Fi 7: Archer BE900 Now Shipping!
3584 1
 What's the url that the BE900 gets its weather from?
87 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.