Added a second TL-SG108 to my mesh network.
Hi:
I added a second TL-SG-108 to my existing network, either directly to a port on the Mesh Network Router or a port on the in-place Tl-SG108.
My issue is that the easy configuration does not pick up the new switch to allow me to configure it. It only slows the original router. A ping to 192.168.0.1 produces a response from the ISP's Modem (WOW). Using 192.168.0.1 takes me into the ISP's modem configurstion.
I would like to change the ip address of the new switch to the same network using 192.168.1.3 (existing switch is 192.168.1.2).
Is there a way to access the switch to change the configure?
Any insight on a resolution would be helpful.
Thanks,
Dennis Friedman