Powerline firmware update failure

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Powerline firmware update failure

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

1o4nn15

2023-03-10 15:23:48

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-09-21

Powerline firmware update failure

2023-03-10 15:23:48

Model: TL-PA8033P KIT

Hardware Version: V3

Firmware Version:

I have the TL-PA8033P Kit

This includes an entry node TL-PA8010P (1 port)

And another one TL-PA8030P (3 Port)

Initially, looking at the model number printed at the back of the node, I downloaded the following firmware:
https://www.tp-link.com/uk/support/download/tl-pa8010p-kit/v3/#Firmware

And installed it on the main node successfully (using the tpPLC app )

Next I noticed the disparity of the models when trying to find the firmware for TL-PA8030P.

From my understanding I should have actually only got the firmware from here ( ? ):

https://www.tp-link.com/uk/support/download/tl-pa8033p-kit/#Firmware

In any case, I then try to update the TL-PA8030P (3 Port) using the firmware from the above link, but the Update fails.

Is this caused because of the first firmware I installed ?

TL-PA8030P - shows version 2.7.0.44-02_803133_2000305_901

TL-PA8010P - shows version 2.7.0.44-02_801133_211220_903

2 Reply

Riley_S

2023-03-13 17:00:28

Posts: 3007

Helpful: 886

Solutions: 117

Stories: 39

Registered: 2022-04-18

Re:Powerline firmware update failure

2023-03-13 17:00:28

@1o4nn15,

Firstly, I would recommend getting in touch with the team from or posting to the Global Community, as your product/model was not sold in the US; and I am not positive about the behavior of powerline firmware since it is far less popular in the states.

It does look like you had used the wrong firmware and because of the matching version numbers, the update fails to see the second firmware as a newer version to what is currently installed. Sometimes our firmware can be used on multiple models, however the functionality of all the features cannot be guaranteed. If you are having no issues with your devices, you may try to wait until a new firmware is uploaded for your model and try updating via the tpPLC utility.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells