Future Consideration Option to hide IoT Network
Request to add the Hidden option to the new IoT network.
The latest firmware update provided the ability to add a specific IoT network. However, no option to hide this network. With IoT devices to be the most volunerable to hacking, I think this is an oversight.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey @Riley_S
Allow me to add my perspective to this discussion.
To me, what you're talking about is no more of a problem than, say, the WPA3 option. For sure, it's a feature that needs to be enabled with care, as not all devices are compatible. Therefore, all you need to do is enable by default the display of SSID and offer an option to hide it, with a small warning about possible compatibility issues.
The very principle of creating an IoT network is to increase the security of the home network by reducing the risk of entry via IoT devices, which are often poorly secured. An option to hide this network therefore makes perfect sense to me.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I agree with @Eseltwift. In the everyday situation, the IOT network should be hidden. While a sniffer could find the hidden IOT network, I don't need to broadcast it as a target. I also don't need my family, guests, or neighbors seeing more than the one or two networks designed for their use.
1. The default mode could be unhidden with parenthesis reminding the user that this is the recommended default.
2. When the IOT network is hidden, a note could pop up reminding the user that the IOT needs to be unhidden for initial discovery by new devices.
At that point, you've warned all of the less informed (less techy) users twice to leave the IOT network alone.
Thanks!
- Copy Link
- Report Inappropriate Content
Just got my DECO system setup with IoT network enabled and was a bit surprised that I couldn't hide it. Please include this feature or option on the next update. Thank you.
- Copy Link
- Report Inappropriate Content
I too would like the ability to not broadcast the IoT SSID
Im suprised we cant nd this thead is 9 months old.... such an easy thing to add
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@cableghost Yes please add this feature, the only network visible is the IoT which I definitely don't want to be seen outside of my home.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I will also throw my hat in this arena. I want the IOT to be hidden. I can deal with turning it on myself if I add any new devices.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 28
Views: 5693
Replies: 46