Windows 10 does not see AXE75 2.4ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Windows 10 does not see AXE75 2.4ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Doreps

2023-02-26 21:55:48

Posts: 2

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2022-11-30

Windows 10 does not see AXE75 2.4ghz

2023-02-26 21:55:48

Model: Archer AXE75

Hardware Version: V1

Firmware Version: 1.1.6 Build 22021208 rel 72102

Windows 10 laptop (22H2, build 19045.2673) with Intel Dual Band Wireless-AC 7265 adapter

AXE75 (AXE5400) v1

Successfully set up, using Tether, AXE75 router with 3 bands, All recognized and connected to a Chromebook. Using RE600X extender successfully on the Chromebook and phone. However, the above Win10 laptop can not see the AXE75 network but does see the ISP gateway wireless network. I can use ethernet connection to log in to the AXE75.

I did change the 2.4ghz router signal to only broadcast bgn. No change

I did a Win10 reset of "Network"

Looking for other suggestions to correct my issue. Thanks!

1 Reply

Doreps

LV1

2023-02-27 02:16:32 - last edited 2023-02-27 02:17:27

Posts: 2

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2022-11-30

Re:Windows 10 does not see AXE75 2.4ghz

2023-02-27 02:16:32 - last edited 2023-02-27 02:17:27

@Doreps Solved my own problem.

When in Tether to assign the 2.4ghz band to bgn only, I failed insure I saved the changed. When I did, it took maybe 2 minutes max to save the change. Unbelievable I overlooked this.

So, my initial issue of the Win10 laptop not seeing the 2.4ghz band

1. the wifi adapter could not handle an ax signal being mixed in with bgn

Windows 10 does not see AXE75 2.4ghz

Windows 10 does not see AXE75 2.4ghz

Information

Voters 0

Tags