Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > How to allow "Transmission" torrent app ports (by enabling UPNP)

< Wi-Fi Routers

How to allow "Transmission" torrent app ports (by enabling UPNP)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to allow "Transmission" torrent app ports (by enabling UPNP)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

the_potato

2022-10-14 12:35:40 - last edited 2022-10-14 12:57:52

Posts: 12

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2021-08-27

How to allow "Transmission" torrent app ports (by enabling UPNP)

2022-10-14 12:35:40 - last edited 2022-10-14 12:57:52

Tags:

Model: Archer AX50

Hardware Version: V1

Firmware Version: 1.0.11 Build 20220526 rel.63519(4555)

I'm trying to allow the "Transmission" app port (51413). I went with the UPNP method because i have a Playstation 4 and a smart tv, and prefer this to happen automatically.

I turned on UPNP, since I do not want the port to be open when it's not running (as in the "forwarding" port opening method).

After opening the app, I get this output while stating that the port is closed.

e87b47a3964b4da7bd80b4bd33cea69f

aa08798856d348d492f4bb4ddfdf0fa3

I want to make sure I am doing this right.

My current setup is that i have the ISP router set to bridge mode with all the built in security features turned off, with nothing connected to it exceot this TP-Link AX50 - considered my main router.

Tnx.

2 Reply

Riley_S

2022-10-14 23:26:49

Posts: 3006

Helpful: 886

Solutions: 117

Stories: 39

Registered: 2022-04-18

Re:How to allow "Transmission" torrent app ports (by enabling UPNP)

2022-10-14 23:26:49

@the_potato,

From what im looking at here, I would think that the port is correctly forwarded and should be working correctly. Is there a possibility that the firewall on your mac is preventing the connection? The docs for the transmission app also allow you to select a port that is different from the default. You could try to change the port to another to see if it that is the issue for some reason. Also, in the configuration of the port forward, there is an option to enable each specific port, make sure that this is enabled.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells

the_potato

LV1

2022-10-15 09:40:02

Posts: 12

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2021-08-27

Re:How to allow "Transmission" torrent app ports (by enabling UPNP)

2022-10-15 09:40:02

@Riley_S I have no firewall other than the default mac firewall which is set to allow.

I tried disabling the firewall and got that same result.

I tried random ports as in the settings, they all show up as closed ports.

> Also, in the configuration of the port forward, there is an option to enable each specific port, make sure that this is enabled

not sure to which settings you are referring to.

How to allow "Transmission" torrent app ports (by enabling UPNP)

How to allow "Transmission" torrent app ports (by enabling UPNP)

Information

Voters 1

Tags