Home

Forums

Stories

Knowledge Base

Home Network Community > Powerline Adapters > Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

< Powerline Adapters

Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Dev-Null

2022-09-17 05:56:48

Posts: 2

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2022-09-17

Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

2022-09-17 05:56:48

Tags:

Model: TL-PA9020P KIT

Hardware Version: V4

Firmware Version: 3.2.4_902104_190506_901

I have been using a TL-PA7017P-KIT (AV1000) for a couple of years and had no issue reaching well over 600Mb/s. I recently upgraded to a TL-PA9020P-KIT (AV2000) and have been unable to achieve anything greated than approx 180Mb/s.

The devices were replaced in the same outlet with the same equipment. Nothing was changed except for unplugging them and plugging in the new ones. I have been unable to remedy the speed issues.

I CAN HOWEVER replace the new devices with the original and they work just as good as before.

I only upgraded for the speed increase and the extra network port.

I have read every post I can find relating to these adapters and/or speed/throughput issues and have yet to see a solution.

How can this be remedied?

2 Reply

Solla-topee

2022-09-19 07:14:17 - last edited 2022-09-19 07:42:18

Posts: 13704

Helpful: 2366

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

2022-09-19 07:14:17 - last edited 2022-09-19 07:42:18

@Dev-Null

Thank you for the feedback, can you share the photos of powerline rate in tpPLC Utility of the PA9020P and PA7010P when they work sperately.

May I know, did you test the kit separately. e.g unplug the TL-PA7017P kit and plug in the new kit

You could refer to FAQ below to remove the factors that could affect the powerline rate as guide below

What can I do if my powerline rate is very low?

Try to plug the main/ extender in a different wall outlet and see if that makes any difference

You could also put TL-PA9020P into the same room, or same power board and check what's the powerline rate at that time.

At the same time, May I know the network topology including the model of modem & router, do you use a VDSL modem?

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Solla-topee

2022-09-27 09:19:18

Posts: 13704

Helpful: 2366

Solutions: 2035

Stories: 8

Registered: 2020-05-19

Re:Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

2022-09-27 09:19:18

Hello @Dev-Null

May I know did the problem get solved later? Feel free to let us know for any observations, thank you.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.

Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

Upgraded from TL-PA7017P (AV1000) to TL-PA9020P (AV2000). Lost 90% of my throughput.

Information

Voters 0

Tags