Static DHCP outside of dynamic DHCP range.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How can I use different IP ranges for dynamic DHCP so they don't overlap with static DHCP? eg.
i want dynamic dhcp to use only 192.168.0.100-200, but static dhcp to use 192.168.0.2-99
Hmm, I'm not use it, but that isn't the way I used to do it?
Checked the Emulator, seems that is how it is done:
Make no sense to me? Even on the Support page there is a video link to YouTube that shows the same (https://www.tp-link.com/us/support/download/archer-ax10/}?
Static and Reserved are 2 different things.
Reserved are addresses within the pool. Doing that the IP Address pool will reserve the specified address for that MAC address only. That way it will not give it out to any other device.
Static are IP Addresses you set on the Device. Normally one would set that OUTSIDE of the Router IP Address pool. The idea being that YOU manage what IP Address your devices get and ones you don't care about, the Router from within the pool gives out the addresses that are not constantly the same for any device that isn't assigned a Reserved one.
Seems like you are trying to set a Static IP Address, that is one outside the IP Address Pool, and if so, you do that on the device IP Address Properties. Do not use one in the same range of the Router IP Address pool or if you do, you could have collisions and a device would be disconnected.
Hmm, I'm not use it, but that isn't the way I used to do it?
Checked the Emulator, seems that is how it is done:
Make no sense to me? Even on the Support page there is a video link to YouTube that shows the same (https://www.tp-link.com/us/support/download/archer-ax10/}?
Static and Reserved are 2 different things.
Reserved are addresses within the pool. Doing that the IP Address pool will reserve the specified address for that MAC address only. That way it will not give it out to any other device.
Static are IP Addresses you set on the Device. Normally one would set that OUTSIDE of the Router IP Address pool. The idea being that YOU manage what IP Address your devices get and ones you don't care about, the Router from within the pool gives out the addresses that are not constantly the same for any device that isn't assigned a Reserved one.
Seems like you are trying to set a Static IP Address, that is one outside the IP Address Pool, and if so, you do that on the device IP Address Properties. Do not use one in the same range of the Router IP Address pool or if you do, you could have collisions and a device would be disconnected.