Deco S4 and unmanaged switches.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco S4 and unmanaged switches.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco S4 and unmanaged switches.
Deco S4 and unmanaged switches.
2022-09-11 07:39:28 - last edited 2022-09-12 18:38:34

I currently have an Archer C8 with three switches installed in different rooms for TV's Rokus, Xbox etc. I want to upgrade to a S4 Deco times three. If my understanding is correct I should be able to remove the C8 which is outdated with one of the S4's then hook up the first switch to it's second jack. Then hook up the cables going to the other switches to the  S4's for the back haul and connect the second jacks on the S4's to the switches?

 

Thanks,

 

Bruce

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco S4 and unmanaged switches.-Solution
2022-09-11 17:35:18 - last edited 2022-09-12 18:38:34

  @Stealthnv1 

Single Ethernet cables from the switch to both Sattelite S4 Decos is all that is necessary for both connectivity and backhaul.

Dual Ethernet connections on the Sattelites would be redundant and possibly cause some signal looping issues.

 

So  ...  Modem -> Primary Deco -> SwitchPort#1(or Uplink port) ... Switch ports -> both Sattelite Decos. 

Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:Deco S4 and unmanaged switches.-Solution
2022-09-11 17:35:18 - last edited 2022-09-12 18:38:34

  @Stealthnv1 

Single Ethernet cables from the switch to both Sattelite S4 Decos is all that is necessary for both connectivity and backhaul.

Dual Ethernet connections on the Sattelites would be redundant and possibly cause some signal looping issues.

 

So  ...  Modem -> Primary Deco -> SwitchPort#1(or Uplink port) ... Switch ports -> both Sattelite Decos. 

Recommended Solution
  1  
  1  
#2
Options
Re:Deco S4 and unmanaged switches.
2022-09-12 15:34:04

  @Stealthnv1 

Thanks for responding. Just to clarify, I should only hook up the first S4 to the first switch via the second port to feed my network.

 

Thanks again,

 

Bruce

  0  
  0  
#3
Options
Re:Deco S4 and unmanaged switches.
2022-09-12 17:14:57

  @Stealthnv1 Exactly. 

 

  0  
  0  
#4
Options
Re:Deco S4 and unmanaged switches.
2022-09-12 19:21:54

  @DAServices 

 

Thanks again

 

Bruce

  0  
  0  
#5
Options