Orange light shows no internet connection. Internet is working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Orange light shows no internet connection. Internet is working.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Orange light shows no internet connection. Internet is working.
Orange light shows no internet connection. Internet is working.
2022-05-17 02:54:02
Model: Archer AX1800  
Hardware Version:
Firmware Version:

No issues with internet. When I plug my computer directly to modem via Ethernet, the internet connects and works fine. When I connect the ax1800 to my modem, the orange light appears.

 

I've used multiple cables, including cables that work fine when connected directly to modem. I've reset the router and modem multiple times.

 

What next?

  0      
  0      
#1
Options
1 Reply
Re:Orange light shows no internet connection. Internet is working.
2022-05-17 03:36:09

Hello @Archer1800 

 

Can I know who is your ISP?

 

Please try the following procedures to ensure you've configured the AX1800 to connect to the internet successfully:

1. Power off both the ISP modem and the AX1800;

2. Wait for 5 minutes;

3. Power on the ISP modem;

4. Wait for 5 minutes;

5. Power on the AX1800 and connect it to the ISP modem LAN port;

6. Wait another 5 minutes, then check if the LED will turn green.

 

If still no internet on the AX1800, but the internet still works fine when connecting the PC directly to the modem, please try to clone the MAC address of the PC to the AX1800 as follows, then check the internet again:

How do I configure MAC Address Clone on my TP-Link Archer Router? (Situation 1)

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options