Connected Devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When I log into the App to look at connected devices, it only shoes devioces connected via wireless, it does not show devices that are wired on the network. How can I view devices that are plugged into the ethernet?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The device list on the APP shows both Ethernet and Wi-Fi connected devices. The issue is that there is no identification of the connection type for each device. You need to select the device , open the details and then drill into the Settings "gear", there you will see the connection type.
Feature Request
It would be nice if there was some type of graphic indication on the main client screen, defining Ethernet vs 2Ghz or 5Ghz connected devices. Maybe an "E" or "2" or "5".
- Copy Link
- Report Inappropriate Content
@DAServices Unfortunately for me, any wired device shows as off line in the app for me, the app is rather close to "junk" and far from feature rich. While the wire mesh is good, the app and web interface are a big disappointment for me
- Copy Link
- Report Inappropriate Content
@Comptu May I know what are the wired Ethernet clients that are connected to Deco?
Have you configured static IPs on these devices?--If yes, you could try to set it to DHCP.
it is suggested to go to Deco APP>Overview>three lines on the top>help>contact us>suggestions and add the system log, then send to us.
By the way, Can I have a picture of the network layout, such as:
Internet service--main X55--network switch---wired clients, other 2*X55 are both wirelessly connected.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hello Comptu. can you also let us know if your Ethernet devices are connected directly to a Deco unit or are they connecting through a Switch. If a switch please let us know what the manufacture and model are.
- Copy Link
- Report Inappropriate Content
Exactly as it was stated earlier, the issue is that there is no identification of the connection type for each device. You need to select the device , open the details and then drill into the Settings "gear", there you will see the connection type. In case it didn't work you can always try your luck with one of the codes available. Perhaps you will be more lucky :) Cheers Mate
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 743
Replies: 5
Voters 0
No one has voted for it yet.