Archer C2300 fails to list devices connected through a switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C2300 fails to list devices connected through a switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Newtonite

2022-02-07 18:03:03

Posts: 6

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-05-21

Archer C2300 fails to list devices connected through a switch

2022-02-07 18:03:03

Model: Archer C2300

Hardware Version:

Firmware Version:

I've replaced a Verizon FiOS router with C2300.

The new Archer, however, does not list quite a few devices that are connected through a switch.

This was not an issue with the FiOS router, which listed all devices connected through a switch.

I use a TP-Link switch, so if anything, I would have expected the Archer to work seamlessly with the switch.

Where do I begin the troubleshooting?

1 Reply

Kevin_Z

2022-02-14 13:28:57

Posts: 21569

Helpful: 5030

Solutions: 2542

Stories: 21

Registered: 2018-12-24

Re:Archer C2300 fails to list devices connected through a switch

2022-02-14 13:28:57

@Newtonite

Thanks for reaching out to us.

Sorry to reply you late, for your issue, please follow steps below to troubleshoot:

1. Please check if you set dynamic IP for all the devices. If you set static IP for some devices, then they can not discovered by the router.

2. Please open cmd command on the device which is not listed on the new router, then type in arp -a and press enter. Next on command window, please check if this comuter can find all the devices.

How to open cmd command: please press win+r on keyboard then type in cmd in the pop-up window and click OK.

3. If you connect these devices directly to the new router bypass the TP-Link switch, will the issue remains the same？What is the model of your TP-Link switch?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Archer C2300 fails to list devices connected through a switch

Archer C2300 fails to list devices connected through a switch

Information

Voters 0

Tags