I am currently having an issue where my third deco was set up and functioning. I notice a few days ago that the light was off so I unplugged it and plugged it back in.

Today the light was off so after power cycling it and the light turned green. After power cycling a few times it most of the time turned green solid and some times I got a dark blue solid but no further actions.

I compared the light to the other decos yellow and blue light, this deco shows a very green light.

Troubleshooting completed:

Power cycled

Reset switch

Test it's power supply

Tested with a different power supply 

Attempted to wire into main deco

Attempted to wire into endpoint

Does no issue an address

Does not show as connected ethernet

Can not connect with static ip

No ethernet link lights

Notes:

This deco was in the same box as the other 2 but set up about 2 weeks later.

This deco was the only one that had a device physically connected to it.