Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Can a CPE510 be integrated into a Deco Mesh to function as a Range Extender for the mesh?

< Deco

Can a CPE510 be integrated into a Deco Mesh to function as a Range Extender for the mesh?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can a CPE510 be integrated into a Deco Mesh to function as a Range Extender for the mesh?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DAServices

2021-10-24 20:46:32 - last edited 2021-10-24 20:47:59

Posts: 163

Helpful: 122

Solutions: 11

Stories: 0

Registered: 2020-01-07

Can a CPE510 be integrated into a Deco Mesh to function as a Range Extender for the mesh?

2021-10-24 20:46:32 - last edited 2021-10-24 20:47:59

Model: Deco M5

Hardware Version: V2

Firmware Version: 1.6.0

I have a customer using M5 and M7 nodes. They are in need of a longer distance Wi-Fi connection. Can I add a CPE510, configured in Repeater "Range Extender" mode, to add a long distance Wi-Fi Lobe to the Mesh. Or can I use Bridge mode to connect to another M5 in the distance, say 300M? Or will any use of the CPE devices totally mess with the Deco Mesh?

2 Reply

TP-Link

2021-10-25 07:04:13

Posts: 6831

Helpful: 3028

Solutions: 536

Stories: 28

Registered: 2018-07-23

Re:Can a CPE510 be integrated into a Deco Mesh to function as a Range Extender for the mesh?

2021-10-25 07:04:13

@DAServices

Hi, it is more suggested that you could set up an AP-Client bridge via CPE, like:

Deco---<wired>--CPE in Access point mode~~~~300M~~~~~~~CPE in client mode---<wired>---other devices.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

DAServices

LV3

2021-10-25 15:38:35

Posts: 163

Helpful: 122

Solutions: 11

Stories: 0

Registered: 2020-01-07

Re:Can a CPE510 be integrated into a Deco Mesh to function as a Range Extender for the mesh?

2021-10-25 15:38:35

@TP-Link

Thanks.

That is the config that I ended up using, just wanted to confirm that was the best or only option.

When I tried adding the CPE as a Range Extender, the Deco Mesh began to become unstable.

Can a CPE510 be integrated into a Deco Mesh to function as a Range Extender for the mesh?

Can a CPE510 be integrated into a Deco Mesh to function as a Range Extender for the mesh?

Information

Voters 0

Tags