Custom DNS Server IPs dont get distributed to clients
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
In the Deco app I have set 2 manual DNS server entries. These 2 entries display properly in the Deco app and the Deco web admin site. However, all the computers that connect to the deco still get the old DNS server values of 1.1.1.1 and 1.0.0.1 . I have had this issue for about 6 months.
Is there something wrong with the Deco firmware and setting your own DNS server values to distribute to clients on the network?
Hi, Thank you very much for the update.
I would like to follow up on your case by email.
And except the WAN DNS, if you go to Deco APP>More>advanced>DHCP server—there is another place to set up the LAN DNS
Have you ever changed anything here?
@TP-Link Yes as I said in my OP I setup exactly as you said (it's the only way). Plus I confirmed it is saved via the Deco app and the Deco admin web site. Yet the DNS server IP distributed to ALL clients are 1.1.1.1 and 1.0.0.1
And before you ask, I have deleted and restarted all the devices many times. I have also many times tried removing the Wifi network on the devices and re-setup the connection to the wifi network. In all cases, the Deco distributes DNS server values 1.1.1.1 and 1.0.0.1.
here are rhe screen shots you requested.
Hi, Thank you very much for the update.
I would like to follow up on your case by email.
And except the WAN DNS, if you go to Deco APP>More>advanced>DHCP server—there is another place to set up the LAN DNS
Have you ever changed anything here?