New Release Deco M5 1.6.1
Latest Firmware Release:
For Deco M5(V1/V2/V3/V3.2)
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Notes:
1. Please update your Deco APP to the latest version for the new features.
2. If there are other Deco models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
3. You may miss some new features when Deco is set to Access Point mode.
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link ever since i updated to 1.6.0 my tv,s and my phones will disconect and when trying to reconect they say ip error. i have to reboot my decos in order to get conected, also the conections seem slower, more unstable and have less range, i have a 3 deco system in mesh mode with only the main conected by wire
- Copy Link
- Report Inappropriate Content
@TP-Link Does the new firmware have a new owner setting like others yet? My son setup this when he lived here with us and now he has new ones at his place. I need to become owner but did not want to do a full reset. Is there a way I can do this? If it has then he can just log in and change from app.
- Copy Link
- Report Inappropriate Content
No the M5 does not have that functionality. IMHO I don't believe it ever will 
- Copy Link
- Report Inappropriate Content
Hi, It may not has a new owner account but it allows to change the owner without a reset.
And later if needed, you could also set up your son's account as the manager:
How to change the owner account on Deco APP
How to add manager account of Deco?
What’s the difference between an owner account and a manager account?
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
@TP-Link David,
As "Seatocl" and I both mentioned that option is not there. Yes it may be an option on many but not ours.
David-TP sent a link to a document that says; "You could change the owner account on the Deco APP without resetting the whole Deco network. First of all, please upgrade the Deco APP and your Deco’s Firmware to the latest version.
NOTE:
1). For the models of Deco which still do not support change the owner account, the update of their firmware will be released in the future. Please keep an eye on the Deco APP."
I believe Item#1 under the NOTE: is specifically what we are referring to. So your response; "it allows to change the owner without a reset.", is not helping in our instances. And is not the full truth.
I am running the Deco App version 2.14.2.
I have a Deco M5 mesh on Firmware Version 1.6.0 Build 20220525 Rel. 48298.
The "Change Network Owner" option is not there. Just "Set Main Deco", "Delete This Network" and "Reboot All"
We await the "future Firmware Uupdate" that resolves this oversight.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for your time and patience.
I have done some tests yesterday and also checked with the senior engineers.
Deco M5 1.6.0 on Android 2.14.2 or IOS 2.14.5 still has the option to change the owner account.
But in some cases, you might see this option on the APP:
1. There are one or more Deco units that are offline on the Deco APP.
2. It is a mixed Mesh network and some models, like Deco M3W, still don't support this feature.
So if all your Deco units are online and the firmware is above 1.5.0, please disconnect/reconnect to the WiFi, then close/open the Deco APP again to have a check.
While if the issue continued, please help us get the APP log.
- Copy Link
- Report Inappropriate Content
Where can I find the Deco M5_V3_1.6.0_220525 firmware? Can't seem to find it in the download page. The page is only showing 1.5.7 firmwares.
- Copy Link
- Report Inappropriate Content
Hi, Sorry for the delay.
Here it is:
(It is suitable for V1/V2/V3/V3.2).
Best regards.
- Copy Link
- Report Inappropriate Content
@TP-Link Greate updates for now
- Copy Link
- Report Inappropriate Content
Is this 1.6 version considered stable ? I see many complains in the forum. As me and my wife are both working from home I'm hesitant to update if will introduce issues to the current stable wifi.
Is there simple rollback option in case something is not stable ?
Thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 12370
Replies: 53
Voters 1
