AX6000 traffic log only shows current day

Kevin_Z

2021-07-22 06:03:33

Posts: 21569

Helpful: 5030

Solutions: 2542

Stories: 21

Registered: 2018-12-24

Re:AX6000 traffic log only shows current day

2021-07-22 06:03:33

@dmnmes123

You should be able to monitor the traffic usage of a specific device or all connected devices in 10 minutes, 24 hours or 7 days. Choose Weekly on the top-right:

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

0

#2

dmnmes123

LV1

2021-07-22 14:09:15

Posts: 7

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-07-21

Re:AX6000 traffic log only shows current day

2021-07-22 14:09:15

@Kevin_Z

I agree, you should be able to. However, it does not show anything for 7 days, only for 1 day or hourly. Every time I've checked the router it only shows the current day under daily, and I haven't rebooted it or anything.

Kevin_Z wrote

@dmnmes123

You should be able to monitor the traffic usage of a specific device or all connected devices in 10 minutes, 24 hours or 7 days. Choose Weekly on the top-right:

0

#3

Kevin_Z

2021-07-23 02:24:08 - last edited 2021-07-23 02:26:19

Posts: 21569

Helpful: 5030

Solutions: 2542

Stories: 21

Registered: 2018-12-24

Re:AX6000 traffic log only shows current day

2021-07-23 02:24:08 - last edited 2021-07-23 02:26:19

@dmnmes123

How about QoS? Enable and configure the QoS settings first, have it either set to something other than Standard or set at least one client as High Priority, then check the Traffic Monitor to see if it records correctly.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

0

#4

dmnmes123

LV1

2021-07-23 03:38:35

Posts: 7

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-07-21

Re:AX6000 traffic log only shows current day

2021-07-23 03:38:35

@Kevin_Z

Kevin_Z wrote

@dmnmes123

How about QoS? Enable and configure the QoS settings first, have it either set to something other than Standard or set at least one client as High Priority, then check the Traffic Monitor to see if it records correctly.

I do have QoS enabled, although it seems a bit limited (although so is my experience so I could be wrong.) I have a few devices set to higher priority, other than that there doesn't really appear to be many options. Having it enabled/disabled seems to have no affect on the traffic monitor. Good thought though, thanks

0

#5

AX6000 traffic log only shows current day

AX6000 traffic log only shows current day

Information

Voters 0

Tags