Home Network Community > Bug Report > Android phones cannot connect to wifi after latest firmware update
< Bug Report

Android phones cannot connect to wifi after latest firmware update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123...

Android phones cannot connect to wifi after latest firmware update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Android phones cannot connect to wifi after latest firmware update
Android phones cannot connect to wifi after latest firmware update
2020-11-01 03:21:18
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20200908 Rel. 42787(5553)

Hi

After this recent update I cannot get my android phones to connect to the wifi anymore. Computers will connect fine. I've tried changing security settings such as WPA/WPA2 and channel widths of 20 or 40 etc. and also the 'modes' from mixed mode to forcing say 802.11n or whatever. I've tried resetting the wireless settings on my phone to no avail. Thanks --Gary

  0      
 
  0      
 
#1
Options
51 Reply
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-02 23:32:16

@Gary_Hanson 

 

Is there an error code?  Have you tried to forget the network on the android device and try to reconnect?

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#2
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-03 01:38:06

@Carl 

No error code..at least, it's too fast to see on the phone and goes to 'saved'..have tried forgetting and re-adding with the same result..thanks for replying

  0  
  0  
#3
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-03 19:18:18

@Gary_Hanson 

 

I'll reach out to our engineering team.  I want to make sure there isn't a bug.  They may want to get in touch with you.  I'll Let you know.

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#4
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-03 22:27:08

@Carl 

okie dokie thanks

It's been difficult to only go so far when using my computer as a hotspot..Fixing the weird quirk in the router so my phones can connect again would be delightful..thanks again

  0  
  0  
#5
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-05 18:03:17

@Gary_Hanson 

 

Hi Gary,

 

So I got a bit more information form the software team.  Here is their response:

 

Our new firmware improves the encryption method. Compared with the old version, the encrypted version of WPA3 has been added, and the encrypted version of WPA2 is adopted by default. May the cx's devices only support WPA encryption algorithm. You can ask him to modify the encrypted version according to the attachment to see if it works.

 

 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  2  
  2  
#6
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-05 18:47:18

@Carl 

Hiya

I've tried all the encryption methods available in the router with the same result

  0  
  0  
#7
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-05 19:00:53

@Carl 

I'll try those again at some time later just to be sure..I forgot to check 'none' for security to see if the issue is still there..my guess is it *shouldn't* work either but I'll find out in a bit n get back to ya

  0  
  0  
#8
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-05 20:10:00

@Carl 

Well..I tried turning off the encryption and WPA/WPA2 so the router was 'open' and my phone connected right away with no issues. I turned on WPA/WPA2-PSK and can't connect...Turned on WPA2/WPA3-Personal and also can't connect..encryption choice didn't matter..Hope this helps with finding this weird bug

  0  
  0  
#9
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-05 20:16:17

@Gary_Hanson 

 

Open networks do not require passwords where as secured ones do.  When you enable secuity please forget the network on your phone and then reconnect.  Ensure the password you enter to connect is correct. 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#10
Options
Re:Android phones cannot connect to wifi after latest firmware update
2020-11-05 20:23:42

@Carl 

yup..that's what I did for each of the attempts..I 'forgot' the network on the phone before tryin the next setting in the router..and the passwords were entered correctly each time

  0  
  0  
#11
Options
123...

Information

Helpful: 0

Views: 8023

Replies: 51

Related Articles
Identifying android phones on the Deco control app
945 0
 Android and iPhone can not connect to AX1500
1119 0
 Cannot connect to Wi-Fi
526 0
 Cannot connect to wifi
352 0
 Cannot Connect wifi
615 0
 Archer AX3000 all Android phones issue
4705 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.