Port forwarding
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Port forwarding
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, I have an issue on Port forwarding.
I can open port for 53 but I cannot open for 8883. I set up in router advance setting.
I checked if port is opened/closed by internet checking site. Router setting for both port are same but 53 is open but 8883 is closed.
I need to open these port to use MyQ garage opener hub.
Is there any idea to resolve this issue?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Posting this to help others. I have an Acher 8 that would not connect either. Verified that the garage door was working OK after connecting to my mobile hotspot. I did everything suggested above, but what made the difference was to switch the security to WPA-PSK (not WPA2). After this, connected immediately. I tried going back to WPA2 and immediately would not communicate with the router again. Hope this helps others. My guess is that Chamberlain is a bit behind on their software - they were quick to dismiss me as a router issue and left it in my hands.
- Copy Link
- Report Inappropriate Content
thanks a lot , I have the exact same problem, working exhausted with chamberlain with no result, you solved my issue
thanks again
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Has anyone found any other solutions to this? I have an A8 and can't change the security to WPA-PSK without breaking a lot of other IoT stuff in my house.
- Copy Link
- Report Inappropriate Content
@zwortnik I have the same issue. MyQ is a fairly common device, would think tp-link could come up with an answer. I'm going to work on this later and will post if I can find a resolution.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 5379
Replies: 15
Voters 0
No one has voted for it yet.