Home Network Community > Wi-Fi Routers > set ethernet speed
< Wi-Fi Routers

set ethernet speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

set ethernet speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
set ethernet speed
set ethernet speed
2020-09-18 19:30:32
Model: Archer C7  
Hardware Version: V5
Firmware Version: 1.0.15 Build 20200628 rel.63501(5255)

Hi all, 

I'm trying to understand why my ethernet card can't establish gigabit speed with Archer C7 router.

 

Is there anything I can do from router UI side to fix that? 

 

ethtool says my ethernet controller does support gigabit ethernet: 

 

$ sudo ethtool enp2s0
[sudo] password for user1:  
Settings for enp2s0:
       Supported ports: [ TP MII ]
       Supported link modes:   10baseT/Half 10baseT/Full  
                               100baseT/Half 100baseT/Full  
                               1000baseT/Half 1000baseT/Full
 

Though connection information shows that it's 100 Mb/s anyway. 

 

 

Please advise.

  0      
 
  0      
 
#1
Options
6 Reply
Re:set ethernet speed
2020-09-18 21:38:51

@marchello 

 

If you don't have a good cable (CAT6 preferred over CAT5e) or the cable is too long, you can't get 1Gbps. First thing to look at.

 

If you do have a good cable, try a different port, still can't, inspect the cable connector, seems fine, try another cable.

  1  
  1  
#2
Options
Re:set ethernet speed
2020-09-18 21:53:11
Thanks IrvSp! Speaking about cable, what exactly does 'too long' mean to you?
  0  
  0  
#3
Options
Re:set ethernet speed
2020-09-18 22:16:51

@marchello 

marchello wrote

Thanks IrvSp! Speaking about cable, what exactly does 'too long' mean to you?

 

Usual length is 100 meters for 328 feet. Intermediate connectors can degrade that distance, as does the construction of the cable.

 

This page might help you, https://www.openeye.net/support/faqs/cat5-versus-cat5e-versus-cat6

 

Don't know what cable you are using, but that alone could be the cause. The device on the PC might be too. Even if it is capable of 1GB, it might have a setting that sets it to 100Mb.

  1  
  1  
#4
Options
Re:set ethernet speed
2020-09-18 22:57:51

@marchello 

 

I agree with @IrvSp I think it is the cable too. 

 

If you happen to have another router you can possibly test on that to see if it follows the cable? 

  0  
  0  
#5
Options
Re:set ethernet speed
2020-09-18 23:07:47
Archer C7 is my the only one that supports gigabit. Will plan to change the cable then. Thanks!
  0  
  0  
#6
Options
Re:set ethernet speed
2020-09-19 14:48:53

@marchello 

 

Switching ports on the router with the present cable will determine if you have a bad port.. If you do, a new cable wouldn't be any better.

  1  
  1  
#7
Options

Information

Helpful: 0

Views: 529

Replies: 6

Related Articles
 Ethernet set up RE650
589 0
 M4 Set up as Access point with Ethernet
445 0
Set up router as access point, get incorrect password error
3396 0
 HOW TO SET UP NON-WIF TV TO DECO-HAS ETHERNET PORT
2130 0
 Trouble accessing Router set up as WAP
596 0
 TP-Link Deco X55 ethernet cable delivered with the set?
944 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.