AX50 2.4GHz channel problems

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX50 2.4GHz channel problems

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX50 2.4GHz channel problems
AX50 2.4GHz channel problems
2020-09-06 19:26:08
Model: Archer AX50  
Hardware Version:
Firmware Version:

I just got this and hooked it up fairly quickly. I was able to get everything up and running, but then had a lot of things go down an hour later. It seems that the items that can only run on the 2.4GHz channel are having issues. I cant get my smartbulbs to get hooked up (but I had them on right after I set up the router) Netflix and Youtube on the Roku, have poor quality, like there is no bandwidth. I ran a speed test and for the 2.4GHz I got 81.5Mbps, with the 5GHz clockin in at 153Mbps. (For some reason the upload tests failed) not sure if this is where hte issue lies. Any help would be appreciated.

  0      
  0      
#1
Options
5 Reply
Re:AX50 2.4GHz channel problems
2020-09-06 20:10:17
Many times the issue is caused when changing a router using the same SSID and password. If that is the case, on each device, delete (forget) the network and then add it back.
  3  
  3  
#2
Options
Re:AX50 2.4GHz channel problems
2020-09-06 21:02:47

@ArcherC8 Thanks, but I had created a new SSID for the new router.

  0  
  0  
#3
Options
Re:AX50 2.4GHz channel problems
2020-09-07 12:35:15

@Fivthwheel  Have you tried specific channels and different band widths?

  0  
  0  
#4
Options
Re:AX50 2.4GHz channel problems
2020-09-07 18:13:26

@ArcherC8 Not yet. I had read about it online.

  0  
  0  
#5
Options
Re:AX50 2.4GHz channel problems
2020-09-08 17:52:11

@Fivthwheel 

 

You could also try making the 2.4G and 5G different names.

  1  
  1  
#6
Options