Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > issue with the Archer AC5400x WAN port

< Wi-Fi Routers

issue with the Archer AC5400x WAN port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

issue with the Archer AC5400x WAN port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Frank321

2020-08-07 20:11:02 - last edited 2020-08-07 20:14:39

Posts: 2

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2020-08-07

issue with the Archer AC5400x WAN port

2020-08-07 20:11:02 - last edited 2020-08-07 20:14:39

Model: Archer C5400X

Hardware Version: V1

Firmware Version: 1.1.2 Build 20191223 rel.73956(5553)

Hi everyone

I have an issue with the Archer AC5400x WAN port wired connection

If I set it to auto-negotiation the WAN port speed is set 100 Mbps and not to 1000 Mbps

the Max speed from the computer is 45 Mbps download & 96 Mbps upload with the auto-negotiation setting, shouldn't that be 96 Mbps download but i digress

But if I try to set the WAN port to 1000 Mbps full duplex I lose the connection to the internet and if I reboot the router with the WAN port set to 1000 Mbps I am still disconnected

from the internet and rebooting the ONT doesn't help

ISP Verizon Fios speed I have is 300 Mbps download & 300 Mbps upload verified by connecting the computer to the ONT without the router

the network card inside the computer is a intel Ethernet I210-T1 GbE NIC the speed & duplex setting is set to 1.0 Gbps full duplex

thanks for any help with this issue

2 Reply

Carl

2020-08-07 21:41:07

Posts: 3808

Helpful: 1139

Solutions: 83

Stories: 25

Registered: 2018-11-01

Re:issue with the Archer AC5400x WAN port

2020-08-07 21:41:07

@Frank321

Hi Frank is Auto-negotiation is choosing the speed of 100 Mbps it could be that the wire is being detected as Cat 5 which is limited to 100 Mbps. Have you confrimed the cable is Cat 5e or higher? If so have you attempted to swap the cable. Of course Is the router on the lastest firmware?

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!

Frank321

LV1

2020-08-07 22:26:10

Posts: 2

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2020-08-07

Re:issue with the Archer AC5400x WAN port

2020-08-07 22:26:10

@Carl

Carl wrote

@Frank321

Hi Frank is Auto-negotiation is choosing the speed of 100 Mbps it could be that the wire is being detected as Cat 5 which is limited to 100 Mbps. Have you confrimed the cable is Cat 5e or higher? If so have you attempted to swap the cable. Of course Is the router on the lastest firmware?

problem solved bad wire thanks

issue with the Archer AC5400x WAN port

issue with the Archer AC5400x WAN port

Information

Voters 0

Tags