Switching and QOS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Switching and QOS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Switching and QOS

johngalt

2020-02-08 23:29:01

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-02-08

Switching and QOS

2020-02-08 23:29:01

Model: TL-SG108PE

Hardware Version: V2

Firmware Version: 1.0.0 Build 20181120 Rel.40990

I have four TL-SG108PE switches running in my home with an Archer C7. I am running high end Audio that does on the fly DSP Decoding in real time so I set all devices and those ports to the highest Quality of service. My question is when I link my switches from port to port should I set those ports to the highest quality of service as well ?

1 Reply

Tony

2020-02-12 17:17:41

Posts: 6306

Helpful: 1519

Solutions: 165

Stories: 41

Registered: 2018-11-06

Re:Switching and QOS

2020-02-12 17:17:41

@johngalt

The port based QoS is based on ingress packets or what ever is coming to the switch can be prioritized. Since the QoS won't touch the egress (outbound) packets I'm not sure if that would really be benificial, but worth testing at least.

Switching and QOS

Switching and QOS

Information

Voters 0

Tags