Slow network performance on AX50/AX3000
Hello, I just purchased a AX50/AX3000 router and am having a terrible time gettingt the LAN speeds to be good. My other router was a Netgear and I was able to confirm that my WAN/Internet speeds are 500/250 from my ISP. I am getting close to that on wireless when I am right near the router. However, with the AX50 I am only getting 60mbps down and 40mbps up. I've tried everything including mimicking my settings from the Netgear router. Could this be an issue with my devices (iPhone and Macbook Pro) not supporting AX?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@PETzz @MWarren90
The QoS and device priority is what trigger the 250-300Mbps issue, disable all (QoS on Standard) and with no device with prioritization.
I have a 1Gbps with my ISP and I can replicate the issue always, any of those parameter active and the THP goes down to 250-300Mbps.
- Copy Link
- Report Inappropriate Content
@CristMog I know, but people keep saying again and again that it's the app.
It is NOT the app. It is the QoS & Device Priority.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@PETzz I've literally never touched the QoS or device priority aside from looking at the tab and moving on. I've never changed those setting away from the default which appears to be "Standard" and no devices selected. How would QoS or device priority be the issues if they were never utilized from the factory default?
- Copy Link
- Report Inappropriate Content
I can confirm it is QOS and not the Tether app itself. I turned off device priority and did a reboot and I'm getting double the wifi speeds I have been struggling with. for months. QOS literally breaks wifi, so irritating.
- Copy Link
- Report Inappropriate Content
I'm having this problem with my ax50, 50% of my isp is all I can get. I've looked for how to turn the QoS off but I can't for the life of me find anywhere to turn it off.
- Copy Link
- Report Inappropriate Content
I've been talking back and forth with tplink support trying to do different troubleshooting steps but no real luck. This is after I've already tried to do the tether app stuff and take it off all together. You can't really turn off QOS but i never messed with it to begin with after factory restores. Turning it on definitely does kill speeds. turning it back off just keeps me about half and lower of the speeds i should be getting.
- Copy Link
- Report Inappropriate Content
Changing the "Internet Port Negotiation Speed Setting" from "Auto Negotiation" to "1000Mbps Full Duplex" did the trick for me, now I get the >700Mbps from previous 100-250Mbps dl speed. It looks like the modem is slowing down the router with lower WAN speeds if it is set to auto negotiation for some reason.
For my Archer AX50 v1.0 Firmware 1.0.9, the setting can be found in System Tools -> System Parameters -> scroll to the very bottom to "Internet Port Negotiation Speed Setting". And you need to switch to the Advanced tab of course.
Cheers,
Pascal
- Copy Link
- Report Inappropriate Content
@David_vt deleted the app off my phone, reset the router......BAM! Finally getting the internet speed I'm paying for!! After months of frustration, thank you!!
- Copy Link
- Report Inappropriate Content
@Carl did you not read the thread? It's about the fricking app that kills your router?
My last experiment with tp link. I guess you guys get paid even if the router goes in the dumpster.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 84032
Replies: 207