ax1500 slow 2.4ghz speeds Is hardware version to blame
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello I recently bought a ax1500 from walmart.
The 5ghz speeds are really good constant 230mbps. But the 2.4ghz arely goes up to 60-80mbps speeds and specially on iphone its a lot slower. No where near the limits it should be at. I just noticed there is hardware versions and mine is v1. Guess i bought a left over product. Is there any difference between hardware versions. Is there a way to fix this issue?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@mkk How could that be, the device box ecen says it is 300mbps for its 2.4ghz. and at times i only got 5-10 on tests.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The term 300 Mbps is derived from applicable specifications and refers to the theoretical maximum raw data transfer rate. This term is used on this product solely to indicate its compatibility with other wireless devices. Actual data speeds vary and are limited by network conditions such as data traffic, overlapping wireless channels, and wireless obstructions.
An exception would be if you are in the same room of the router and have single digit speeds which means something would be wrong.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Is only one wireless device being used? What is the type and model of it and distance from the router?
- Copy Link
- Report Inappropriate Content
@Tony My Samsung Galaxy S9, 4 feet in front of the router.
- Copy Link
- Report Inappropriate Content
If the 5GHz gives you good speed, then the modem, cable, and WAN checks out. If the 2.4Ghz is consistantly slow there may be something interferring with the signal that is not with the 5GHz.
I have a AX10 (same as AX1500) with a 30 Mbps connection. The 2.4GHz result I get is around mid 20s, distance is not as great compared to my C2700 2.4Ghz, but in the same room is definately not right.
Might be best to contact support since modifying channels were tried.
One other last thing I can think of is to upload the same firmware on the router. Someone had speed issues with the C5400x, and re-uploaded the latest firmware which it already had and seemed to resolve it.
- Copy Link
- Report Inappropriate Content
@Tony ,
I am pretty sure its the hardware or firmware to blame. I have the exact same issue.
I have tried everything ever mentioned in tp link website to try to fix this but it wont work.
I have a 100 mbps connection and all is fine on 5ghz but i just get 10 mbps on 2.4 ghz standing next to the router. I also have a netgear extender as an access point and for the same connection it gives 60-70mbps standing next to it. This is a huge difference. I even put both the extender and ax1500 on the same channel but no success.
You have a tplink badge next to your avatar looks like you are work for tplink ? If yes please tell your engg dept to fix this with a firmware release or something or this is my last tp link product.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 9487
Replies: 26
Voters 0
No one has voted for it yet.