I’m not sure my WPA7510 extender is working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

I’m not sure my WPA7510 extender is working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I’m not sure my WPA7510 extender is working
I’m not sure my WPA7510 extender is working
2019-10-21 00:33:16
Model: TL-WPA7510 KIT  
Hardware Version: V2
Firmware Version: 2.0.0 Build 20180330 Rel.37074

I just recently added a wireless 7510 kit to my existing powerline network.  Everything seems to work fine, but the extender (not the bigger box) goes into powersave mode and disappears off the tpPLC app and web configuration page quickly. I would like to see some verification that things are working on this unit, so I can return it if it is not.

  0      
  0      
#1
Options
1 Reply
Re:I’m not sure my WPA7510 extender is working
2019-10-21 17:56:43

@Retto 

 

The powerline light will tell you if there is a connection. If the LED is off, there is no communication to hte powerline network, if it is on it is talking through the electrical wiring.

 

In the tpPLC utility, you can disable powersave mode in the advanced settings of that device. While looking at the map in the utilitity, click on the gear icon for Advanced settings > Mode.

 

 

  0  
  0  
#2
Options