Slow file transfer between clients on LAN?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have been using my 3 Deco M9 Plus for about 6 months and they work great but there one problem. Whenever i fransfer a file from one client to another the speed rarley goes above 100mbit. The clients are connected to eth on the Deco's and the speeds are the same no matter what protocoll i use FTP,SMB. All my clients reaches speeds of 250mbit to the internet so the network seems to work fine besides the slow client to client file transfer.
Is this normal or am i missing someting here?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Dj_Mamana Do you have the antivirus option enabled on the decos? I have the same issue and I have been trying to figure out whats causing it.
- Copy Link
- Report Inappropriate Content
@pgar Hello. Deco M4 does not have anti-virus option, or I couldnt find it in the mobile app.
- Copy Link
- Report Inappropriate Content
@pgar Hello, I could not find such option (Anti-virus) in Deco M4
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have Deco M9 Plus. Before I was getting getting 200 kiloBYTES/sec on transfers between computers on my network when connected on ETH on the same node. Here's my setup. All of my nodes are wirelessly connected to each node.
Cablemodem <----ETH---->Master Node
Linux Computer w/Samba <----ETH---->Slave Node <------ETH----->Desktop Win10 (This is where the transfer speeds are terrible.)
I removed all clients from the "High Priority List" in the QOS settings and set the QOS profile to standard and somehow that did the trick. I'm now able to get around max 72 MBps (576 Mbps) which I'm quite happy about although 1 gbps would be nicer. Also setting the QOS profile to gaming bogs down the transfer speeds. I don't know if the below steps will help you but this is what worked for me.
1. Set QOS profile to standard.
2. Remove all devices frrom "High Priority"
3. Run speed test under the QOS settings.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 9218
Replies: 25
Voters 0
No one has voted for it yet.