WIFI connected devices not showing up as WIFI clients
Hello,
I have my device in Access point mode as I have another router handling the DHCP portion of the network.
I have multiple devices connected to the Wifi network and yet only one device shows connected when I log into the management page.
Shouldn't all the devices show up un the WIFI section? I am trying to verify who is connected to the Wifi portion of my network.
I have verified all the devices are on the correct network with the correct subnet masks. I have also verified on my DHCP server that they are active, but again I want to verify this on the TP-link WIFI section.
Any help would be great.
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
You can get them in two ways depending on the network setup.
1. Look at the leases on the dhcp server. You might have to figure out which leases were from wireless users. That's the reason for opening this ticket, it's a bad way to manage the network.
2 I have not verified this yet, but this is wise he meant by PINGn. if you have access to the wireless users devices, Ping the wireless router IP address from those devices, it will then register the MAC address. This is unrealistic when you manage a wireless network with constant new users.
@Carl any word on a fix?
- Copy Link
- Report Inappropriate Content
No nothing as of yet. I have asked for an update and will update the thread as soon as i am able to.
@Lusayalumino, Alen is correct in his explanation of what I meant by pinging, For how to get a list of connected devices go to the router's UI and follow this path. Advanced > Network > DHCP server > DHCP client list. Though this will not be available if you are in AP mode as the router would not be providing DHCP addresses.
- Copy Link
- Report Inappropriate Content
Hey I am also having the same issue with my Archer A6 model.
Firmware Version :- 1.1.0 Build 20181224 rel.49176(4555)
Hardware Version :- Archer A6 v2.0
Any update on this?
- Copy Link
- Report Inappropriate Content
.
How are you trying to use the router? As a router or an AP? Are you looking at the client list via the web UI or in the Tether app?
- Copy Link
- Report Inappropriate Content
Using as Router; accessing via web.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi Carl, I am using it as an AP and tried both web console and APP both show no clients connected.
Moreover, as an update to this, we had a spare Archer C6 laying around so I configured it too as AP with a similar setup as A6 and it works without any issue and shows client list both in Web UI and Tether APP. So it's definitely something wrong with the A6 series.
- Copy Link
- Report Inappropriate Content
@Concerned-Admin Same issue with the C4000 in AP mode.
- Copy Link
- Report Inappropriate Content
Yeah, same happens with my C6 in AP mode. Currently no clients are shown at all.
Whereas I understand that wired devices are not AP's responsibility (it's a switch after all), I would expect to see authenticated clients in the wireless network, even if they don't have IP address.
Weird thing is sometimes they all show, but yesterday had a power outage and still not a single wireless client appears in the list, not even the phone I use to manage it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 45055
Replies: 135
Voters 2
