Why am I only getting around 30 Mbps on 2.4ghz?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Just bought the router, had my ISP bridge the modem did some speed test on 2.4 and 5ghz and I notice 2.4 only stays at 30 mgps. Is there a reason for this my 5G shows 170 meg which is correct thanks for all your responses.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If your 5GHz is showing the correct speed than likely the issue with 2.4GHz is congestion. You will want to check the channel and channel width being used. I would recommend channels 1,6,11 as they have the least ammount of overlap with other channels so should have the least ammount of interference. They are the most used channels so congestion may be a issue. If that is the case try reducing the channel width to 20MHz. this will narrow the band a bit and improve the throughput. Channel settings are always trial and error though. You can use a wifi anyalzer to find the least congetsted channel. Lastly make sure the frimware is up to date.
Best
- Copy Link
- Report Inappropriate Content
Been testing it now for a day I'm just going to leave it the way it is have my laptops and phones connected it to 2.4ghz.
- Copy Link
- Report Inappropriate Content
And TVs and consoles on the 5G band seems to be all good so just going to leave it
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6371
Replies: 3
Voters 0
No one has voted for it yet.