Home Network Community > Adapters > T9UH problems on 5GHZ band / channels
< Adapters

T9UH problems on 5GHZ band / channels

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

T9UH problems on 5GHZ band / channels

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T9UH problems on 5GHZ band / channels
T9UH problems on 5GHZ band / channels
2018-01-31 00:27:30
Model :

Hardware Version :

Firmware Version :

ISP :

I have a ASUS RT-AC66R Dual Band AC1750 router, configured as an AP. On the 5GHz band, it is configured for channel 149/80MHz, It has been operating fine with this configuration for several years with other USB adapters (Rosewill N900UBE and ASUS USB AC56) plus other devices (e.g. iPad).

I purchased the TP-Link Archer T9UH hoping to improve the reliability of the connection I was getting with the ASUS USB AC56.

I am running Windows 10 Home 32bit at the latest update on the machine that is using this adapter.

I downloaded the latest drivers from the TP-Link web site.

The T9UH does not see the 5GHz SSID at all. It is just not there.

When I reconfigure the ASUS RT-AC66R to auto channel on the 5GHz band, rather than fixed channel at channel 149, the T9UH sees the 5GHz SSID and connects.

As an experiment, I set the ASUS RT-AC66R to fixed channel at a different channel, and the SSID again disappeared from the T9UH.

What is going on? I would prefer to select the channel rather than leave it on auto. Why doesn't this work with the T9UH?
  0      
 
  0      
 
#1
Options
6 Reply
Re:T9UH problems on 5GHZ band / channels
2018-01-31 17:25:02
a fixed channel such as channel 36 could work?
  0  
  0  
#2
Options
Re:T9UH problems on 5GHZ band / channels
2018-02-01 00:11:34

Shield101 wrote

a fixed channel such as channel 36 could work?
Perhaps it would, I'll check tonight. But setting the fixed channel to 36 defeats the purpose. I would like it to operate on channel 149+ (80MHz width).

Why doesn't the T9UH work with setup I had?
  0  
  0  
#3
Options
Re:T9UH problems on 5GHZ band / channels
2018-02-03 01:17:36
Here is what I have determined after running tests with a variety of setups on my access point.

My T9UH will only see the low channels in the 5GHz band. It will operate at channel 36, 40, 44, or 48, but nothing else.

...
  0  
  0  
#4
Options
Re:T9UH problems on 5GHZ band / channels
2018-02-03 01:33:57
According to the specifications (ref: TP-Link Archer T9UH User Guide), this adapter supports:

5.18~5.24GHz, (i.e. channels 36-48)
5.26~5.32GHz, (i.e. channels 52-64)
5.500~5.700GHz, (i.e. channel 140)
5.745~5.825GHz (i.e.channels 149-165)

So, why doesn't mine see anything above channel 48? The adapter previously installed in this computer ( ASUS USB AC56) had no problem @ channel 149 / 80Mhz, so it is not the computer itself that is the problem.

Is it the driver?
Is it the T9UH firmware?
Are the specs wrong?

I could use some help.
  0  
  0  
#5
Options
Re:T9UH problems on 5GHZ band / channels
2018-02-13 11:50:37
https://sites.google.com/a/vhhscougars.org/johnsearch/searchindex/archer_t4uh_v1_171121

Try out this driver, fixed the issue for some other people
  0  
  0  
#6
Options
Re:T9UH problems on 5GHZ band / channels
2018-06-09 02:09:14

johnb_xp wrote

https://sites.google.com/a/vhhscougars.org/johnsearch/searchindex/archer_t4uh_v1_171121

Try out this driver, fixed the issue for some other people


Just signed up to these forums to say thank you :)

So far these have solved all my (non)related issues with the official drivers.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 4254

Replies: 6

Related Articles
 Channel Selection on the 5GHz Band
2952 0
 Authentication Problems in 5GHz
973 0
 5Ghz band disappears
567 0
 Archer C7 5GHz Problems
2988 0
 AX73 (AX5400) Missing 5Ghz Channels
549 0
 5Ghz Channels on BE85: Are DFS Channels 100 and above (UNII-2C) utilized
130 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.