Deco nodes frequently disconnect
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco nodes frequently disconnect
Model :
Hardware Version :
Firmware Version :
ISP :
Several of my Deco M5 nodes, but one in particular (Node 1), will disconnect from the system at very frequent intervals (disconnects between 5-30 minutes apart).
I've done some cursory research, and my Gateway Node has about a -50dB strength to the location where Node 1 is. Is there an idea signal strength to stay above? -50dB is not a weak signal by any means. However, this node has a very hard time staying connected. Any help is appreciated.
Hardware Version :
Firmware Version :
ISP :
Several of my Deco M5 nodes, but one in particular (Node 1), will disconnect from the system at very frequent intervals (disconnects between 5-30 minutes apart).
I've done some cursory research, and my Gateway Node has about a -50dB strength to the location where Node 1 is. Is there an idea signal strength to stay above? -50dB is not a weak signal by any means. However, this node has a very hard time staying connected. Any help is appreciated.