TL-WR802N V4 will not connect with iPhone 6S, using the phone as a wifi hotspot
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version :
Firmware Version :
ISP :
Hardware is TL-WR802N(US) Ver. 4.0
s/n: 2178038000645
f/w is factory installed.
iPhone is 6S running iOS 11.2
iPhone 6S works as a wifi hotspot with 4 other devices with no problem. So the iPhone is not the problem.
The TL-WR802N Nano router will connect with an LG Escape 2 Android phone but not with the iPhone 6S.
On your TL-WR802N download page, there are no f/w updates available.
I've now tried about 50 times with all different configurations after reset, to configure the setup to connect to iPhone 6S with no success. I've tried Hotspot mode and Client mode. Quick setups and manual setups.
TL-WR802N V2 is known to work with iPhone 6 series. What did you change in V4????????
This is definitely a compatibility issue with the firmware in the Nano router and there are 10's of millions of iPhone 6 series phones in service.
How soon can we have this fixed with a f/w update?
Anyone have a workaround for this problem???????????
Frustrated to no end.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I see you are regitered from the UK so i assume these products are being used there. We do have a community who handles your region community.tp-link.com/en. We can try our best to assist you but we do not have any experiance with a drytek system and firmware varries based on region. I just wanted to let you know this so in case we aren't able to help you can repost your question on the EN community for possible response from that team.
First thing i need to know is how are the TL-WR802Ns connected to the Drytek device and in what mode are the configured? Are the operating at the same time?
- Copy Link
- Report Inappropriate Content
Hello everyone!!
I used to have the exact same issue with the exact same phone (iPhone 6S+): It couldn't detect the hotspot created by the phone, and so on. The solution is very simple: update to the latest firmware available (which is 0.9.1_3.17, and it was published this year) and that's it. After the router restarts, everything will work properly
Thanks to TP Link's dev-team, they are the best!!
Regards
- Copy Link
- Report Inappropriate Content
I also use Re: TL-WR802N V4 and when I access this website menuslot.org there are always technical glitches like 404 and sometimes the network can be very fast and it can be very slow also when it rains.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 7081
Replies: 23
Voters 0
No one has voted for it yet.