TL-WR802N V4 will not connect with iPhone 6S, using the phone as a wifi hotspot
Hardware Version :
Firmware Version :
ISP :
Hardware is TL-WR802N(US) Ver. 4.0
s/n: 2178038000645
f/w is factory installed.
iPhone is 6S running iOS 11.2
iPhone 6S works as a wifi hotspot with 4 other devices with no problem. So the iPhone is not the problem.
The TL-WR802N Nano router will connect with an LG Escape 2 Android phone but not with the iPhone 6S.
On your TL-WR802N download page, there are no f/w updates available.
I've now tried about 50 times with all different configurations after reset, to configure the setup to connect to iPhone 6S with no success. I've tried Hotspot mode and Client mode. Quick setups and manual setups.
TL-WR802N V2 is known to work with iPhone 6 series. What did you change in V4????????
This is definitely a compatibility issue with the firmware in the Nano router and there are 10's of millions of iPhone 6 series phones in service.
How soon can we have this fixed with a f/w update?
Anyone have a workaround for this problem???????????
Frustrated to no end.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
same problem occured for me. When i connect to hotspot, and want to open a site cyberflix , but its not opening , its showing network error. Can any one resolve my issue .
Thanks with best regards.
- Copy Link
- Report Inappropriate Content
I have engaged our software team and i will let you know when i have an answer to this.
thank you
- Copy Link
- Report Inappropriate Content
Hi everyone.
So as of now this firmware is a Beta, but it should resolve the issue. You can download it from here: If you have any trouble please Tag me in your response and I will look into it.
- Copy Link
- Report Inappropriate Content
Carl
i have tried to put the new Firmware in but it is not accepting it, i have the below already in?
the error code I get is 4503
Firmware version:0.9.1 3.16 v0001.0 Build 170421 Rel.74156n
Hardware version:TL-WR802N v4 00000004
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 7076
Replies: 23
Voters 0
No one has voted for it yet.