Home Network Community > Wi-Fi Routers > Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]
< Wi-Fi Routers

Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]
Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]
2017-09-01 06:08:22
Model :

Hardware Version :

Firmware Version :

ISP :

Hello!

I've recently purchased the AC1900 Wireless Dual Band Gigabit Router, Archer C9

I have been searching for a way to turn off the LED lights. I can't seem to find a "Night Mode", or an LED Control.

Is there no LED Control or Night Mode for the Archer C9? I have a repeater as well, which is the RE450, and it was very easy to turn off the LEDs. It was as simple as "Go to Settings > System Tools > LED Control. Select Night Mode".



Thank you!
  0      
 
  0      
 
#1
Options
6 Reply
Re:Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]
2017-09-01 10:04:12
If the hardware version of your router is version 5, there is LED control. It's not available for other versions.
  0  
  0  
#2
Options
Re:Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]
2017-09-01 10:06:30
How would I find out which version my C9 router is?

I purchased it about 3 months ago, if this information gives any incite.
  0  
  0  
#3
Options
Re:Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]
2017-09-01 10:11:54
Just look at the label on the back of your router, you will see Ver. 1, 2... or 5, that's the hardware version
  0  
  0  
#4
Options
Re:Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]
2018-05-27 06:37:27

Shield101 wrote

Just look at the label on the back of your router, you will see Ver. 1, 2... or 5, that's the hardware version
Hi! Same problem with C9. I have V4. Can i install V5 firmware?
  0  
  0  
#5
Options
Re:Archer C9; Where is the night mode? [AC1900 Wireless Dual Band Gigabit Router]
2018-05-27 06:50:38
Hi! Same problem on my C9. I have V4. Can i install V5 firmware?
  1  
  1  
#6
Options
Low-tech solution.
2018-06-01 07:05:59
Painter's tape or gaffer tape both can be cut to size to look neat, and can come back off easily and cleanly if someday you no longer want night mode (I'm serious. I do this on a couple devices at home).
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 2037

Replies: 6

Related Articles
Archer C9 AC1900 won't connect to Modem
26195 1
USB 3.0 Hub Support on Archer C9/AC1900
1220 0
 Archer C9 Bridge mode
2454 0
 Archer C9 AC1900 5Ghz Not Working and 2.4Ghz Slow
1522 0
 Multi-Source for Internet Signal? (AC1900 // Archer C9)
415 0
 Archer C9, TP-Link AC1900 HTTPS administration ?
801 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.