Tapo Smart Switches
Transform your traditional light switches into smart lights with Tapo Smart Switches! Control your lights with your voice, remotely manage your power usage, and create automation scenes for ultimate convenience. This forum section is your resource for installation guides, compatibility questions, and discussions about getting the most out of your Tapo Smart Switches.
Tapo Smart Switches
is there any update for a new product for at least a 4-way dimmer switch? The 3-way works great; however, I had to remove the 4-way switch from my setup and replace with a blank switch cover.
0Helpful
43Views
The Tapo app appears to be missing a required feature for Matter multi-admin. I purchased Tapo S505 switches and added them to Matter using the Tapo app as recommended (rather than a 3rd party). Now I
Matter ProtocolConfiguration Guides and Tips
0Helpful
122Views
I want to dim my lights if it is left on after certain period, but I cannot figure out with Tapo automation. I have S505D Dimmer switches. 1. If the light is left on for 30 minutes, 2. Dim it to 50% o
By
EggheadCaptain
· Latest post 2 weeks ago
by RyanEverhart789
0Helpful
67Views
1. Is there a command option available on the smart switches that will allow one to FLASH the lights? I want to be able to put the switch into an "ALARM" mode, whereby I can tell the switch to flash (
By
stuntflyer
0Helpful
51Views
My house was built in the 1930s and does not have a neutral or ground wire for light switches. Can I use the S500 or S500D with no ground wire?
Wiring & InstallationConfiguration Guides and Tips
0Helpful
114Views
I have a KS200MP2 switch that I'd like to use to control what I think is a 3-way configuration. There are two switches that control the same light at the top of the stairs. When I connect it, the swit
Wiring & InstallationConfiguration Guides and Tips
By
gossamer
0Helpful
82Views
Will matter support be added to any of your speciality switches? I'd love to see a 3-way for the hallways and motion sensor dimmer switch for the bathrooms. Also a matter switch that didn't require a
Matter Protocol
By
Swinterry
· Latest post 2024-09-30 18:55:30
by GaryinSanJose
1Helpful
333Views
Hi, I am new to this forum. I just got TAPO S500 wired to turn the outdoor light on LED bulbs . But when turning on the light ( either mechaincally or by TAPO app ) the lights just blink (and turn off
0Helpful
137Views
I have two places in my house where I am attempting to replace switches with Tapo S505 switches. The first is by the front door. There is a box with two switches, one for the porch light and the other
Wiring & Installation
2Helpful
544Views
I've been researching smart switches similar to the battery-powered Tapo S210. Many users dislike it due to concerns about rapid battery drain caused by Wi-Fi connectivity. However, based on my resear
0Helpful
135Views