Business Community > Switches > Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
< Switches

Early Access Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)

Early Access Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)

Early AccessOmada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
2025-03-06 07:55:58 - last edited 2025-03-12 02:32:45
Tags: #Firmware Update

This Article Applies to

 

Model Hardware Version Firmware Version Firmware Date Rel Numb
SG2210P V5 5.20.10 20250304 77614
SG2210MP V5 5.0.7 20250304 77614
SG2428P V5.30 5.30.7 20250306 77614
SG3428 V2 2.30.7 20250304 77898
SG3428MP V6 6.20.10 20250304 77898

 

If your model is not listed, it is not supported in this batch. Please wait for future firmware releases.

 

Release Notes

 

New Features:

 

1. OUI-Based VLAN
2. Route unknown for IGMP Snooping and MLD Snooping.
3. Support the modification of vlan1 name. 
4. The VLAN name length is extended to 128 characters..
5. Report lag status log.
6. SNMPv3 AES encryption.
7. 802.1x supports client LEAP authentication.
8. Display the MAC status of the address through snmp.

 

Enhancement:

 

1. Optimize drop unknown configuration.
2. Spanning tree is enabled by default.
3. Add a risk warning for enabling Port Fast.
4. Add a risk warning for disabling VLAN1.
5. Display LAG total bandwidth.
6. Optimize port utilization statistics display.
7. Optimize log port description.
8. Optimize VLAN information display.

 

Bug Fixes:

 

1. Fix client authentication failure in specific scenarios.
2. Fix the linkage problem of aggregation group and port isolation under specific configuration.
3. Fix the problem that DNS requests to NTP Server are too frequent in specific scenarios.
4. Fix the linkage problem between port security and address aging.
5. Fix the linkage problem between port rate change and loop detection.
6. Fix the display problem of DDM and port status in specific scenarios.
7. Fix the display problem where the port description configuration is too long.
8. Fix the SNMPV3 security level restriction access problem.
9. Fix the missing DHCP option entries in specific scenarios.

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Switches

 

Firmware Download Link

 
SG2210P V5 5.20.10
SG2210MP V5 5.0.7
SG2428P V5.30 5.30.7
SG3428 V2 2.30.7
SG3428MP V6 6.20.10

 

Notes:

 

(1) The above firmware is applied to matching hardware.

(2) Your device’s configuration won’t be lost after upgrading.

 

Additional Information

 

All feedback is welcome, including letting us know about successful device upgrades.

If somehow you encounter an issue during or after the upgrade, it's suggested to contact us with the following info:

  • Omada Controller version if you have any.
  • Device Firmware version with Build number (previous and current)

 

If your model gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.

Configuration Guide How to Upgrade/Downgrade Omada Switches

 

Update Log

 

Mar 6th, 2025:

Release of this article.

 

Recommended Threads

 

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0      
 
  0      
 
#1
Options
10 Reply
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
2025-03-17 08:13:54 - last edited 2025-03-17 08:14:17

  @Clive_A 

 

1.30.8 popped up on the Controller firmware page for my SG3428X last night (in early access), so applied it.

 

Might be worth adding in the changelog that MSTP has also been added, i dont see this noted anywhere

 

 

So far no problems with this firmware on the one switch i have applied it on

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x1, ES205G x2, EAP650 x6 Remotes: ER605 v2 x3, SG2008P x2, EAP650 x2 VPN Server: ER7206 v2 Controller: OC300
  1  
  1  
#2
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
2025-03-18 19:52:57 - last edited 2025-03-18 19:53:34

  @Clive_A 

 

On Mar 15 I upgraded my SG3428X v1.30 switch to the latest Beta FW. 1.30.8 Build 20250307 Rel.72795. Since then I have been getting DDM status alert warnings: 

The voltage of the SFP module on ......... 's port Te1/0/28 is higher than warning point.
 
Before that upgrade I had no such logs. I was on 1.30.4 Build 20250121 FW version.
Shall I ignore them?
 
Thanks.
HW Controller: OC300 1.0 Router: ER707-M2 v1.0 Switch: SG3428X v1.30 APs: EAP650(EU) v1.0, EAP683 UR(EU) v1.0
  1  
  1  
#3
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
2025-03-19 01:16:55

Hi @krupier 

Thanks for posting in our business forum.

krupier wrote

  @Clive_A 

 

On Mar 15 I upgraded my SG3428X v1.30 switch to the latest Beta FW. 1.30.8 Build 20250307 Rel.72795. Since then I have been getting DDM status alert warnings: 

The voltage of the SFP module on ......... 's port Te1/0/28 is higher than warning point.
 
Before that upgrade I had no such logs. I was on 1.30.4 Build 20250121 FW version.
Shall I ignore them?
 
Thanks.

Module model number. And hardware version if you are using a TP-Link module.

Are you using it in controller mode or normal mode?

Can you make sure that your previous log are stored and double-checked that there are no logs about DDM?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
2025-03-19 19:32:01 - last edited 2025-03-19 21:16:14

Hi  @Clive_A 

 

1. Module model number: TL-SM5310-T

2. I am using it in Controller Mode (via OC300)

3.  HW ver.: 1

4. I have made sure there were no logs of this type prior to the upgrade

 

I have two modules of the same type. I am getting logs on both of them. Even when I unplugged patch cable (connecting the switch to my AP) I am still getting the warning logs on the module.

HW Controller: OC300 1.0 Router: ER707-M2 v1.0 Switch: SG3428X v1.30 APs: EAP650(EU) v1.0, EAP683 UR(EU) v1.0
  1  
  1  
#5
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
2025-03-20 02:20:52

Hi @krupier 

Thanks for posting in our business forum.

krupier wrote

Hi  @Clive_A 

 

1. Module model number: TL-SM5310-T

2. I am using it in Controller Mode (via OC300)

3.  HW ver.: 1

4. I have made sure there were no logs of this type prior to the upgrade

 

I have two modules of the same type. I am getting logs on both of them. Even when I unplugged patch cable (connecting the switch to my AP) I am still getting the warning logs on the module.

Expected behavior. New firmware has adapted to the new controller and now the log records and displays this information.

It should be there all the time. Before the upgrade, it had this information but was not displayed on the controller log.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#6
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
2025-03-20 10:36:53
Thank you for your info. So I will not mind the logs anymore :-)
HW Controller: OC300 1.0 Router: ER707-M2 v1.0 Switch: SG3428X v1.30 APs: EAP650(EU) v1.0, EAP683 UR(EU) v1.0
  1  
  1  
#7
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
a week ago

  @Clive_A 

 

I forgot to post some feedback on here

 

Although unlisted in this post, i applied the beta firmware available through the controller to the following switches 2 weeks ago

 

SG3428X v1.3

SG2428LP v1

SG3210 v3.2

SG2218P v2

SG2008P v3.2

 

I havent had any issues at all.

 

Would be nice to get a matching one for my SG3452 as well, but that one always seems to be the last to get any updates for whatever reason!

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x1, ES205G x2, EAP650 x6 Remotes: ER605 v2 x3, SG2008P x2, EAP650 x2 VPN Server: ER7206 v2 Controller: OC300
  1  
  1  
#8
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
a week ago

Hi @GRL 

Thanks for posting in our business forum.

GRL wrote

  @Clive_A 

 

I forgot to post some feedback on here

 

Although unlisted in this post, i applied the beta firmware available through the controller to the following switches 2 weeks ago

 

SG3428X v1.3

SG2428LP v1

SG3210 v3.2

SG2218P v2

SG2008P v3.2

 

I havent had any issues at all.

 

Would be nice to get a matching one for my SG3452 as well, but that one always seems to be the last to get any updates for whatever reason!

This was actually redacted. I was gonna post about 30 models, but the US team rejected such a public test. 

They simply denied the dev's proposal to send more pre-release to the file server and do a public test.

They say it is not proper and too dangerous to do it. I don't know why they would not allow that since we did this on the forum last time and why it is dangerous or improper. They seem not to bother themselves with uploading around 30 files to the server. As this requires manual evaluation and time.

 

Our privilege to upload a firmware was removed by them. Not sure why, but it's gonna be hard to do the job.

 

SG3452 is not compiled in this test.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#9
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
a week ago

  @Clive_A 

 

Are you no longer allowed to post beta firmware for anything? or just this batch for the switches?

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x1, ES205G x2, EAP650 x6 Remotes: ER605 v2 x3, SG2008P x2, EAP650 x2 VPN Server: ER7206 v2 Controller: OC300
  0  
  0  
#10
Options
Re:Omada Switch Pre-Release Firmware Adapting to Omada SDNC 5.15.8.2 (Released on Mar 6th, 2025)
a week ago

Hi @GRL 

Thanks for posting in our business forum.

GRL wrote

  @Clive_A 

 

Are you no longer allowed to post beta firmware for anything? or just this batch for the switches?

Batch. Not gonna do a pre-release or beta for 10 or above. Just a small number of models will have the pre-release or beta. They decide which models to release. 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1575

Replies: 10

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.