Switch Frozen During Firmware Update

Clive_A

Monday - last edited Monday

Posts: 5742

Helpful: 2766

Solutions: 1299

Stories: 0

Registered: 2023-06-09

Re:Switch Frozen During Firmware Update

Monday - last edited Monday

Hi @DocPMD

Thanks for posting in our business forum.

From what version did you upgrade to 1.20.X?

Are you upgrading from the first release of 1.20.0?

Controller type and version are also needed.

The upgrade may take a longer time than usual products.

I think there is nothing you can do for now, not sure what you tried. Try a reset and start over.

Or enter the CLI and you can recover an image.

How to enter the BootUtil menu to reset TP-Link Managed Switch via Console Port

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

0

#2

DocPMD

LV1

Monday - last edited Monday

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-03-04

Re:Switch Frozen During Firmware Update

Monday - last edited Monday

@Clive_A

It was at firmware version 1.0.0

Controller F70B75 just upgraded to most recent firmware

I contacted customer support on Friday and sent me link to directions to access the boot menu of the switch. I tried several times from my Mac using terminal and the screen command and either it didn't work at all, or I couldn't get the timing right to interrupt the normal boot to access the menu.

I was going to try a reset.

So I'm stuck.

"Or enter the CLI and you can recover an image" - I don't know what that means.

The switch shows disconnected on the controller and does not show up on the client list, so it is not communicating at all with the rest of the network.

0

#3

Clive_A

Monday

Posts: 5742

Helpful: 2766

Solutions: 1299

Stories: 0

Registered: 2023-06-09

Re:Switch Frozen During Firmware Update

Monday

Hi @DocPMD

Thanks for posting in our business forum.

DocPMD wrote

@Clive_A

It was at firmware version 1.0.0

Controller F70B75 just upgraded to most recent firmware

I contacted customer support on Friday and sent me link to directions to access the boot menu of the switch. I tried several times from my Mac using terminal and the screen command and either it didn't work at all, or I couldn't get the timing right to interrupt the normal boot to access the menu.

I was going to try a reset.

So I'm stuck.

"Or enter the CLI and you can recover an image" - I don't know what that means.

The switch shows disconnected on the controller and does not show up on the client list, so it is not communicating at all with the rest of the network.

Huh.. CLI is the abbreviation of the command line interface.

You should first consider resetting your device if it does not automatically get adopted back.

Try to read the User Guide at least. It is useful if you don't know that and it explains things before I explain every term and instruction.

It needs to be reset if it does not get back. Something might be wrong and I cannot comment or judge what might be the case as I am not you.

Based on the information, it looks like it lost its IP address. Firmware should not brick it anyway because the switch keeps the backup image. And never saw a switch became bricked. You can rest assured.

Reset it and let it boot up and log in to it or adopt it and then proceed with the manual upgrade by downloading the firmware. Start with the closest firmware. Don't skip to 1.20.X. Upgrade to its previous firmware and upgrade to 1.20.0. Then to the latest.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

0

#4

GRL

LV3

Monday - last edited Monday

Posts: 173

Helpful: 90

Solutions: 13

Stories: 0

Registered: 2022-01-02

Re:Switch Frozen During Firmware Update

Monday - last edited Monday

@DocPMD

timing is everything when entering the bootutil menu with a usb cable to reset it

I found the following method most reliable and i can get it first time 90% of the time

Have your terminal or putty software ready, and plug the USB cable into switch and computer. In PC, you can use device manager to identify which COM port number its been given (no real way to tell otherwise)

Have putty pre-configured and ready with that particular port number ready to run.

Leave the cable plugged in.

Unplug switch from power.

Plugh switch back into power. WAIT 2 seconds. no more, no less

Connect with putty / terminal app

MASH CONTROL+B / COMMAND+B

The menu should pop up

0

#5

Clive_A

Wednesday - last edited Yesterday

Posts: 5742

Helpful: 2766

Solutions: 1299

Stories: 0

Registered: 2023-06-09

Re:Switch Frozen During Firmware Update-Solution

Wednesday - last edited Yesterday

Hi @DocPMD @GRL

We noticed something was not right with the new firmware.

We are looking into the new releases for the Omada switch adapting to V5.14.

If you just updated it, please revert to the previous firmware. We will release it soon after we resolve the known issues.

In your case, the affected firmware:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Switch Frozen During Firmware Update

Switch Frozen During Firmware Update

Information

Voters 0

Tags