Switch stacking
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello, I noticed that in the CLI and User Guides recently updated for the SX3008F switch, these now include UI & CLI commands to configure switch stacking, but these are not implemented in the v1.20.0 firmware - can you tell us if / when this functionality will be coming to the SX3008F? This is a much deisred feature and would strongly encourage us to purchase more of these switches!
Thanks
-f
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Nlx
Thanks for posting in our business forum.
I think you might refer to the latest SG6000 series User Guide which as a fully capable layer 3 switch, it supports such a feature.
This S(G)X3000 series so far does not support it and no plan so far.
- Copy Link
- Report Inappropriate Content
Thanks for your post, Clive.
However, two points: 1 - I downloaded the newly updated CLI manual and User Guides from https://www.tp-link.com/us/support/download/tl-sx3008f/ - the support page for the SX3008f, where I also downloaded the latest firmware (v1.20.0) - seems these manuals were updated with the new firmware. It is unfortunate to say the least that TP-Link would have only one CLI / UI manual to cover all business switching products!!
2 - Switch stacking is a L2+ feature - does not require any L3 functionality to implement nor deploy.
Seems to me the industry dividing line between L2+ and L3 is that full L3 products implement dynamic routing protocols (RIP, OSPF). Somewhat ironically, it is the specific absence of these protocols that make switch stacking (and other redundancy / resiience features like M-LAG) a more desirable, more important feature in an L2+ product!
Very few people know how to fully configure L2+ switches to properly provide resilient connections under all failure modes - even the knowledge base article posted recently to this forum misses a bunch of important configuration. Proper configuration is both complex and requires a lot of effort / commands! Switch stacking and / or M-LAG (and/or other L2+ functionality) would make this process much simpler and easier at no significant loss of performance.
-f
- Copy Link
- Report Inappropriate Content
Hi @Nlx
Thanks for posting in our business forum.
I think you might refer to the latest SG6000 series User Guide which as a fully capable layer 3 switch, it supports such a feature.
This S(G)X3000 series so far does not support it and no plan so far.
- Copy Link
- Report Inappropriate Content
Thanks for your post, Clive.
However, two points: 1 - I downloaded the newly updated CLI manual and User Guides from https://www.tp-link.com/us/support/download/tl-sx3008f/ - the support page for the SX3008f, where I also downloaded the latest firmware (v1.20.0) - seems these manuals were updated with the new firmware. It is unfortunate to say the least that TP-Link would have only one CLI / UI manual to cover all business switching products!!
2 - Switch stacking is a L2+ feature - does not require any L3 functionality to implement nor deploy.
Seems to me the industry dividing line between L2+ and L3 is that full L3 products implement dynamic routing protocols (RIP, OSPF). Somewhat ironically, it is the specific absence of these protocols that make switch stacking (and other redundancy / resiience features like M-LAG) a more desirable, more important feature in an L2+ product!
Very few people know how to fully configure L2+ switches to properly provide resilient connections under all failure modes - even the knowledge base article posted recently to this forum misses a bunch of important configuration. Proper configuration is both complex and requires a lot of effort / commands! Switch stacking and / or M-LAG (and/or other L2+ functionality) would make this process much simpler and easier at no significant loss of performance.
-f
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 563
Replies: 2
Voters 0
No one has voted for it yet.