Omada SDN Controller_V5.14.20 Pre-release (Updated on May 29th, 2024)

Omada SDN Controller_V5.14.20 Pre-release (Updated on May 29th, 2024)

Omada SDN Controller_V5.14.20 Pre-release (Updated on May 29th, 2024)
Omada SDN Controller_V5.14.20 Pre-release (Updated on May 29th, 2024)
2024-04-12 06:51:49 - last edited 2024-05-29 11:10:51

This Article Applies to

Omada_SDN_Controller_v5.14.20 Windows (Windows 7/8/10/11/Server, 64bit Recommended)

OC200(UN)_V1_1.31.1_Build20240428(Beta)(Built-in Omada SDN Controller 5.14.20.21)
OC200(UN)_V2_2.16.1_Build20240428(Beta)(Built-in Omada SDN Controller 5.14.20.21)

Omada_SDN_Controller_v5.14.20.9_linux_x64_20240522214051.tar

Omada_SDN_Controller_v5.14.20.9_linux_x64_20240522214102.deb

 

Overview

 

We hope to offer you a chance to experience the new features added in the Controller v5.14.20 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including letting us know about successful upgrades.

 

Release Notes

 

New Features

1. Added support for OLT devices: DS-P7001-04(UN) 1.1.0, DS-P7001-08(UN) 1.1.0.

2. Added support for gateways: ER7406(UN) 1.0, ER7206(UN) 2.20.

3. Added support for ES series switches: ES205G(UN) 1.0, ES205GP(UN) 1.0, ES210GP(UN) 1.0.

4. Added support for GPON APs: EAP610GP-Desktop, EAP615GP-Wall.

5. Added support for data statistics of OLT devices in Statistics.

6. Added support for Bandwidth Control and Port VLAN of GPON devices in Device > Properties windows > Port Status.

7. Added support for VoIP function in Site View > Settings, for which OLT devices supporting VoIP are needed.

8. Added support for Print Comments in Voucher: The content of Comments will be printed when printing the Voucher.

 

Enhancements

1. Optimized the interactive interface and automatic alarm removal in Logs.

2. Optimized channel and power deployment for the wireless network.

3. Optimized the logic of wireless roaming, and increased the stability of connection and experience of roaming.

4. Optimized the logic of topological identification, added support for third-party LLDP clients display as nodes in Site > Map > Topology, and enhanced the accuracy of network topology recognition.

5. Optimized the display of configuration status, and added status notice of configuration result in Devices > Device List.

6. Optimized the interactive interface of Online API Document in Global View > Settings > Platform Integration.

7. Optimized default wireless settings of new-created SSID, enabled 802.11r automatically when user created new SSID.

8. Optimized the logic of displaying Full-Sector DFS and Connectivity Detection, only after Mesh is enabled these functions can be accessible.

 

 

Notes

1. This version of the Controller is fully applied to the Omada APP of version 4.16 or above.

2. Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.

3. For the Windows version, Java 8 (or OpenJDK-8) and above are required. How to install Java Runtime Environment (JRE) for Omada SDN Controller on Windows?

4. For the Linux version, 64-bit Linux OS is supported and Java 8 (or OpenJDK-8) and above, MongoDB v3 and v4 are necessarily required. How to install Omada SDN controller on Linux system (above Controller 5.0.29)

5. Added a Beta watermark overlay to the interface. (For OC200 only)
6. Cloud firmware updates have been temporarily disabled in this beta version. (For OC200 only)

 

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.

(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.

 

Firmware Download Link

 

  • Direct Download

 

Omada_SDN_Controller_v5.14.20_Windows (Pre-release version)

Omada_Controller_Windows_v5.14.20.8 (Pre-release version)

OC200(UN)_V1_1.31.1_Build20240428(Beta)(Built-in Omada SDN Controller 5.14.20.21)
OC200(UN)_V2_2.16.1_Build20240428(Beta)(Built-in Omada SDN Controller 5.14.20.21)

Omada_SDN_Controller_v5.14.20.9_linux_x64_20240522214051.tar

Omada_SDN_Controller_v5.14.20.9_linux_x64_20240522214102.deb

 

 

Additional Information

If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:

  • Omada Controller version (previous and current)
  • Device Model(s), Hardware and Firmware versions
  • (if possible) A copy of the Log file and Backup Config file

 

If you decide to downgrade the controller before reporting the issue to TP-Link, it's suggested to save a copy of the current Log file and Backup Config file before you do that, which could help to investigate and address the issue quickly.

 

>> How to get the Log file and Backup Config file for Omada SDN Controller:

  • If your Windows software controller failed to get launched, please locate the controller installation path for the Log file.

  • If it's not a launch issue, you can export the Log file and Backup Config file in the local network.

    • For Omada Controller v5.8 or later version,

      In the Global View, go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.

    • For Omada Controller v5.6 or v5.7, 

      Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export  for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.

    • For Omada Controller v5.5 or previous version,

      Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file . Go to Settings > Services > Export Data > Running Log to export the Log file.

 

Update Log

 

May 29th, 2024:

Provide the following controller firmware for early access.

  • Omada_SDN_Controller_v5.14.20.9_linux_x64_20240522214051.tar
  • Omada_SDN_Controller_v5.14.20.9_linux_x64_20240522214102.deb

 

Apr 30th, 2024:

Update the Omada Software Controller (Windows) beta version

  • Before

Omada_SDN_Controller_v5.14.20_Windows (Pre-release version)

  • After

    Omada_Controller_Windows_v5.14.20.8 (Pre-release version)

 

Provide the following controller firmware for early access.

  • OC200(UN)_V1_1.31.1_Build20240428(Beta)(Built-in Omada SDN Controller 5.14.20.21)

  • OC200(UN)_V2_2.16.1_Build20240428(Beta)(Built-in Omada SDN Controller 5.14.20.21)
     

Apr 12th, 2024:

Provide the following controller firmware for early access.

  • Omada_SDN_Controller_V5.14.20_Windows (Pre-release version)

 

Recommended Threads

 

TP-Link Early Access Program Is Now Available!

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1      
  1      
#1
Options
2 Accepted Solutions
Re:Omada SDN Controller_V5.14.20 Pre-release (Updated on Apr 30th, 2024)-Solution
2024-04-30 11:19:00 - last edited 2024-04-30 11:19:05

  

Update Log

Apr 30th, 2024:

Update the Omada Software Controller (Windows) beta version

  • Before

Omada_SDN_Controller_v5.14.20_Windows (Pre-release version)

  • After

    Omada_Controller_Windows_v5.14.20.8 (Pre-release version)

 

Provide the following controller firmware for early access.

  • OC200(UN)_V1_1.31.1_Build20240428(Beta)(Built-in Omada SDN Controller 5.14.20.21)

  • OC200(UN)_V2_2.16.1_Build20240428(Beta)(Built-in Omada SDN Controller 5.14.20.21)

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#16
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Updated on May 29th, 2024)-Solution
2024-05-29 11:11:44 - last edited 2024-05-29 11:11:51

Update Log

May 29th, 2024:

Provide the following controller firmware for early access.

  • Omada_SDN_Controller_v5.14.20.9_linux_x64_20240522214051.tar

  • Omada_SDN_Controller_v5.14.20.9_linux_x64_20240522214102.deb

 

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#25
Options
27 Reply
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-12 09:22:05

  @Hank21 

 

ISP load stopped working after upgrading, I have restarted the router and controller without this helping

ER8411 Site

 

Same thing on remote site.

ER707-M2 site

 

 

  1  
  1  
#2
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-12 12:30:07

 

2. Added support for gateways: ER7406(UN) 1.0, ER7206(UN) 2.20.

3. Added support for ES series switches: ES205G(UN) 1.0, ES205GP(UN) 1.0, ES210GP(UN) 1.0.

 

  @Hank21 

 

Are you able to give us more deets on this?!  

 

 

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#3
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-15 02:41:48

 

KimcheeGUN wrote

 

2. Added support for gateways: ER7406(UN) 1.0, ER7206(UN) 2.20.

3. Added support for ES series switches: ES205G(UN) 1.0, ES205GP(UN) 1.0, ES210GP(UN) 1.0.

 

  @Hank21 

 

Are you able to give us more deets on this?!  

 

 

Hi @KimcheeGUN 

These models are all new products and will be shipped in the future. You can keep an eye on the official website or forum for updates on the release of new products.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#4
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-15 02:54:14

 

MR.S wrote

  @Hank21 

 

ISP load stopped working after upgrading, I have restarted the router and controller without this helping

ER8411 Site

 

Same thing on remote site.

ER707-M2 site

 

 

Hi @MR.S 

Thanks for your feedback.

 

May I know whether the Internet service was still available? What kind of devices are connecting to the ER8411&ER707-M2?

 

What about the firmware of the ER8411 and ER707-M2? Please make sure they are up-to-date. 

 

BTW, may I also confirm whether the routers can get the WAN IP successfully?

 

Thanks again for testing. Looking forward to your reply.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-15 04:32:03

  @Hank21 

 

Internet is available, everything looks and works as it should except ISP Load statistics.
ER8411 gets Public IP from DHCP without problem, ER707-M2 has fixed public WAN ip

 

ER8411 v1.0 Firmware Version:1.2.1 Build 20240308 Rel.75819

ER707-M2 v1.0 Firmware Version:1.2.2 Build 20240324 Rel.42799

 

 

  0  
  0  
#6
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-15 09:12:37

 

MR.S wrote

  @Hank21 

 

Internet is available, everything looks and works as it should except ISP Load statistics.
ER8411 gets Public IP from DHCP without problem, ER707-M2 has fixed public WAN ip

 

ER8411 v1.0 Firmware Version:1.2.1 Build 20240308 Rel.75819

ER707-M2 v1.0 Firmware Version:1.2.2 Build 20240324 Rel.42799

 

 

Hi @MR.S 

We are currently attempting to identify and reproduce the issue, and we will reply to you again once we get any update. 

 

Please feel free to inform us if you have any other findings. Thanks.

 
Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#7
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-15 16:51:01

Will this version allow full 28dBm power on 6GHz radio on the EAP783?

On 5.13.24 even when set to 'High' or explicitly to 28dBm they would only broadcast at 20dBm.

When I upgraded to the pre-release 5.14.11 they broadcast at 23dBm.

 

Both the 2.4 Ghz and 5 GHz bands have and will broadcast at full 28dBm when set to it.

  0  
  0  
#8
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-16 03:31:29

 

MrAdministrator wrote

Will this version allow full 28dBm power on 6GHz radio on the EAP783?

On 5.13.24 even when set to 'High' or explicitly to 28dBm they would only broadcast at 20dBm.

When I upgraded to the pre-release 5.14.11 they broadcast at 23dBm.

 

Both the 2.4 Ghz and 5 GHz bands have and will broadcast at full 28dBm when set to it.

Hi @MrAdministrator 

May I know the version of your EAP783, is it EU version or it is US version? Please also share how did you configure the tx power on EAP and the results you tested.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-19 01:30:39 - last edited 2024-04-19 04:15:20

Hank21 wrote

 

MrAdministrator wrote

Will this version allow full 28dBm power on 6GHz radio on the EAP783?

On 5.13.24 even when set to 'High' or explicitly to 28dBm they would only broadcast at 20dBm.

When I upgraded to the pre-release 5.14.11 they broadcast at 23dBm.

 

Both the 2.4 Ghz and 5 GHz bands have and will broadcast at full 28dBm when set to it.

Hi @MrAdministrator 

May I know the version of your EAP783, is it EU version or it is US version? Please also share how did you configure the tx power on EAP and the results you tested.

  @Hank21 

 

They are US models EAP783, V1.6. Just updated to firmware 1.0.10 This behavior also occurred on 1.0.9, however it was 20dBm and 23dBm. Now on 1.0.10 it is 19dBm and 22dBm respectively.

 

I believe I was incorrect previously in thinking controller software affected it. I think the configured channels changed when I changed controller device and version.

 

Configuring the AP via Omada controller in the radio settings, I have set to 160MHz channel width, 28 dBm broadcast power, and tried every PSC channel available.

 

37: 19dBm

53: 19dBm

69: 19 dBm

85: 22dBm

101: 19 dBm

117: 19dBm

133: 19dBm

149: 19dBm

165: 19dBm

181: 19dBm

197: 19dBm

213: 22dBm

 

I confirmed channels that fell within U-NII-5 and U-NII-7 were still broadcasting at this lower power despite being set to 28dBm.

 

It is my understanding that full power should be observed in U-NII-5 and U-NII-7 while 23dBm should be the observed maximum in U-NII-6 and U-NII-8. It seems like something is wrong with regards to determining transmit power based on region.

 

I am located in US and my controller site is configured as US west coast.

 

When I get a chance I am going to forget one AP and configure it standalone to see if the same low broadcast power is observed.

 

Edit: in standalone mode, 2.4 and 6ghz bands dont report transmit power for some reason, only 5ghz. I am unable to tell if the expected 28dBm is achieved in standalone mode.

 

Also through forgetting and re-adopting an AP the other one on channel 165 started to broadcast at 22dBm. So confusing, this is.

  0  
  0  
#10
Options
Re:Omada SDN Controller_V5.14.20 Pre-release (Released on Apr 12th, 2024)
2024-04-23 08:16:44

 

MrAdministrator wrote

Hank21 wrote

 

MrAdministrator wrote

Will this version allow full 28dBm power on 6GHz radio on the EAP783?

On 5.13.24 even when set to 'High' or explicitly to 28dBm they would only broadcast at 20dBm.

When I upgraded to the pre-release 5.14.11 they broadcast at 23dBm.

 

Both the 2.4 Ghz and 5 GHz bands have and will broadcast at full 28dBm when set to it.

Hi @MrAdministrator 

May I know the version of your EAP783, is it EU version or it is US version? Please also share how did you configure the tx power on EAP and the results you tested.

  @Hank21 

 

They are US models EAP783, V1.6. Just updated to firmware 1.0.10 This behavior also occurred on 1.0.9, however it was 20dBm and 23dBm. Now on 1.0.10 it is 19dBm and 22dBm respectively.

 

I believe I was incorrect previously in thinking controller software affected it. I think the configured channels changed when I changed controller device and version.

 

Configuring the AP via Omada controller in the radio settings, I have set to 160MHz channel width, 28 dBm broadcast power, and tried every PSC channel available.

 

37: 19dBm

53: 19dBm

69: 19 dBm

85: 22dBm

101: 19 dBm

117: 19dBm

133: 19dBm

149: 19dBm

165: 19dBm

181: 19dBm

197: 19dBm

213: 22dBm

 

I confirmed channels that fell within U-NII-5 and U-NII-7 were still broadcasting at this lower power despite being set to 28dBm.

 

It is my understanding that full power should be observed in U-NII-5 and U-NII-7 while 23dBm should be the observed maximum in U-NII-6 and U-NII-8. It seems like something is wrong with regards to determining transmit power based on region.

 

I am located in US and my controller site is configured as US west coast.

 

When I get a chance I am going to forget one AP and configure it standalone to see if the same low broadcast power is observed.

 

Edit: in standalone mode, 2.4 and 6ghz bands dont report transmit power for some reason, only 5ghz. I am unable to tell if the expected 28dBm is achieved in standalone mode.

 

Also through forgetting and re-adopting an AP the other one on channel 165 started to broadcast at 22dBm. So confusing, this is.

Hi @MrAdministrator 

Thanks for feedback.

 

The 6GHz need to be complied to the FCC. Currently our firmware is not support AFC, thus we have implemented that the beacons are transmitted using a single antenna path at 22 dBm. But for actual data transmissions, the 4x4 MIMO antenna allows transmitting at a higher power level of 28 dBm. 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#12
Options