Business Community > Pharos Wireless Bridges > CPE510 multiple VLAN
< Pharos Wireless Bridges

CPE510 multiple VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE510 multiple VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 multiple VLAN
CPE510 multiple VLAN
2023-09-19 23:33:29
Model: CPE510  
Hardware Version: V3
Firmware Version: 2.2.2 Build 20201111 Rel. 58267 (5553)

Have 2 CPE510 devices 100ft apart, trying to pass multiple vlans set as AP and Client (below), any help I appreciate your input

 

 

  0      
 
  0      
 
#1
Options
6 Reply
Re:CPE510 multiple VLAN
2023-09-20 09:56:32

  @rebelbah 

 

CPE is a VLAN-Passthrough device, the image shows your CPEs are working properly, what is the issue?

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:CPE510 multiple VLAN
2023-09-20 11:41:00

  @Virgo I have those 2 units connected to my network and on the client side I have a TL-SG2008P 8 port switch and a EAP115(US) v4.0 AP.

The switch is adpoted but the AP will not readopt nore can you connect to the ap and get internet, I have a turned off and on the POE port the AP is connected to and turned to power off to all devices and back on, it will not adopt, only thing I have not done is move the AP to the main switch to adpopt and updat if needed, any other thoughts

  0  
  0  
#3
Options
Re:CPE510 multiple VLAN
2023-09-21 03:46:51

  @rebelbah 

 

The switch can be adopted, but the AP can not. It proves the issue isn't on the CPE at least otherwise I don't think the switch can be managed properly.

Did you set any VLAN or ACL on the switch port? If you connect the AP to the client CPE, can it be adopted? ping the AP IP, can you ping through?

Just striving to develop myself while helping others.
  0  
  0  
#4
Options
Re:CPE510 multiple VLAN
2023-09-21 12:00:29

  @Virgo VLAN on switch is set to ALL(4 VLANs),

20.129 is the AP, 20.120 is the switch bothe on the client side

 

 

SWITCH ACL

2 - Pinter is on LAN group

3 - Pinter is on LAN group

the rest I think show their info

 

 

 

  0  
  0  
#5
Options
Re:CPE510 multiple VLAN
2023-09-22 11:58:13 - last edited 2023-09-22 11:59:21

  @Virgo I have gotten this

 

 

I have clicked force provision and this has come back

  0  
  0  
#6
Options
Re:CPE510 multiple VLAN
2023-09-24 23:39:13 - last edited 2023-09-24 23:41:00

  @Virgo turned them all off and made no difference

 

 

 

 

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 920

Replies: 6

Related Articles
 CPE510 - Multiple Problems
1234 0
Tp link Cpe 510 wireless multiple client
643 0
Cpe510(UN) & (EU)
466 0
Cpe510
72 0
 Multiple CPE 510 in a pole
340 0
Multiple Wifi SSID/Multiple VLAN´s
841 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.