Business Community > Accessories > Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
< Accessories

Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-09-05 04:48:38
Tags: #SFP Module

Hi,

in the Maual to the 10Gbit SFP+ transceiver it is written that you have to enable flow control on the port when the peer connection has not 10 Gbps.    In omada controller, when i select the uplink port, there is a message that says something like "This is the uplink port, you shouldnt change anything" .     

 

Am i right that i have to enable flow control on every port when the connection has not 10Gbps?   I wonder because ihave a modem/router which has only 2.5Gbps.    WOuld that mean that i have to enable flow control on every sfp+ port powered with the 10Gbps SFP+ modul of tp-link

  0      
 
  0      
 
#1
Options
8 Reply
Re:Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-09-06 02:28:37

Hi @Daniel2908 

Thanks for posting in our business forum.

If you connect a 2.5Gbps modem, please keep flow control enabled.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-09-06 02:50:21

  @Clive_A thanks.  On every port that has not a 10ths connection and on the uplink too right ?

  0  
  0  
#3
Options
Re:Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-09-06 02:51:44

Hi @Daniel2908 

Correct.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options
Re:Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-09-21 16:11:50
Question i have 1.5 gb internet using cat8 cable if i had this model would my internal network speed increase or stay the same BE19000 have this model included 10Gbps TP LInk sfp+
  1  
  1  
#5
Options
Re:Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-09-25 07:51:00

Hi @tonyjp2022 

Thanks for posting in our business forum.

tonyjp2022 wrote

Question i have 1.5 gb internet using cat8 cable if i had this model would my internal network speed increase or stay the same BE19000 have this model included 10Gbps TP LInk sfp+

If you use a 10Gbps SFP+ module and a router capable of SFP+, then you should get the full speed from 1.5Gbps. Because the link speed is 10Gbps on the router side. But you gotta make sure the modem can sync to 10Gbps. Or that might cause an issue.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#6
Options
Re:Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-10-19 19:13:40
Thank you very much i dont think my rogers cable modem can sync past 2.5 gb is the current max my account 1,5 also is it possible to setup dns servers inside these as well 1.1,1.2 cloudflare 8.8.8.8 google public dns secure doh over dns with quic is now https/3
  0  
  0  
#7
Options
Re:Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-10-20 01:33:08

Hi @tonyjp2022 

tonyjp2022 wrote

Thank you very much i dont think my rogers cable modem can sync past 2.5 gb is the current max my account 1,5 also is it possible to setup dns servers inside these as well 1.1,1.2 cloudflare 8.8.8.8 google public dns secure doh over dns with quic is now https/3

Thanks for posting in our business forum.

BE model WiFi devices are not my specialty. I don't know the software. You may seek help from the home support. None of the business products we have support WiFi 7 yet.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#8
Options
Re:Question about 10Gbps TP LInk sfp+ modul - enable flow control when peer connection has not 10 Gbps
2023-10-20 13:38:16

  @Clive_A  I was refeeding to http/3 with quic protrol to enypt traffic

Clive_A wrote

Hi @tonyjp2022 

tonyjp2022 wrote

Thank you very much i dont think my rogers cable modem can sync past 2.5 gb is the current max my account 1,5 also is it possible to setup dns servers inside these as well 1.1,1.2 cloudflare 8.8.8.8 google public dns secure doh over dns with quic is now https/3

Thanks for posting in our business forum.

BE model WiFi devices are not my specialty. I don't know the software. You may seek help from the home support. None of the business products we have support WiFi 7 yet.

on 3 streams & it also loads faster

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 1405

Replies: 8

Tags

SFP Module
Related Articles
SFP+ Modules, TP-Link SM5310-T ver 2.0 and SM5310-T ver 1.2
626 0
ER8411 10Gbps SFP+ WAN speed
553 0
 SFP-Modul to connect TL-SG2210MP with T1600G-52TS
608 0
TP-Link ER7212PC SFP can support 2gb or 10gb SFP RJ45?
272 0
SFP copper interconnect between TP-Link switches
2187 0
 TL-SG3452X 10Gbps SFP+ Port Slows other connections
551 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.