TL-ER7206 doesnt add load to WAN2
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have 3 wan configuration. I have setuped load balancing mode. Load balancing weights are WAN1 600, WAN 2 70 and WAN3 50 (as internet speeds in reality are for download side). When i use full load to router when i load something for some reason router only add load to WAN1 and WAN3, WAN2 only stays at idle. How to fix this. All WAN's are online and online test ip is set for Cloudflare.
For example when i load GTA V from steam WAN2 stays at zero.
I think there is some kind of bug in TL-ER7206 or/and OC200 firmware. Settings has not been changed. This system has worked before.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @satelite,
1. May I know the firmware version of your OC200?
2. Are you sure this issue start to happen after you upgraded the firmware?
Could you tell me which exact version of firmware on which exact device the issue occurred after upgrading?
3. Have you tested the data transmission on several client devices?
Could you use the "tracert" command to test? A screenshot of the test result will be helpful.
- Copy Link
- Report Inappropriate Content
1.
5.9.32
2. Actually last larger data dump is from january for that WAN2... i thinked that i havent been using so much data to multi-wan activate this connection. i Tried full load to my network and WAN2 stays at idle.
3. Yes several devices at same time, full load with multiple connections at same time. Another WANs stays at full load but WAN2 idles. I dont have all of the devices available to make new larger test at the moment but somehow TP-Link uses only WAN1 or WAN3. With my settings this has been working before. Nothing about multi-wan settings has not been changed.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @satelite，
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230437115, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 799
Replies: 7
Voters 0
No one has voted for it yet.