This Article Applies to:  TL-SG3428MP V2, V3, V5, V6 | Adapted to Omada SDN Controller v5.9

Updated on 21 Mar 2023:

 

Thank you all for your valuable feedback on the TL-SG3428MP beta.

 

Official release for TL-SG3428MP V2, V3, V5, V6 is now available.

Please check for updates via cloud or via the TP-Link Official Website manually.

 

TL-SG3428MP V2, V3, V5, V6 (official version):

 

TL-SG3428MP(UN)_V2_2.0.12 Build 20230302   Release Note >

TL-SG3428MP(UN)_V3_3.0.8 Build 20230302   Release Note >

TL-SG3428MP(UN)_V5_5.0.5 Build 20230302    Release Note >

TL-SG3428MP(UN)_V6_6.0.3 Build 20230302    Release Note >

 

Thank you for your attention!

 

------------------------------------------------------------------------

 

Hi Everyone,

 

We are excited to announce that we now have the Beta firmware of TL-SG3428MP V2, V3, V5, V6  that is fully adapted to Omada SDN Controller v5.9 for trial!

 

The Purpose Of The Beta Firmware

 

We hope to offer you with a chance to experience the new features added in the Controller v5.9  in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release.

 

Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

 

Release Notes:

 

New Feature/Enhancement:

 

1. Fully adapted to Omada Controller v5.9, with the following features supported:

1) CLI Configuration;

2) IPv6 features, including MLD Snooping, Legal DHCPv6 Server, ACL, Static Route, etc;

3) IP-Port Mask type for Group profiles;

5) Network topology optimization by reporting LLDP information to the Omada Controller;

6) Device Info;

7) Tools, including Network Check, and Terminal.

 

2. Modified the working mechanism of DHCP Snooping. After the upgrade, when the Port Trust mode is disabled, the switch records the IP address, MAC address, VLAN ID, and Port number of the DHCP client for automatic binding; when this mode is enabled, the switch doesn't record the above information of the DHCP client connected to the port, and doesn't generate IMPB binding entries. By default, this mode is enabled, and should be changed to Disabled for access ports if necessary.

 

3. Modified the working mechanism of MVR. You will be able to add 4000 MVR groups, but the number of Maximum MVR groups in effect at the same time remains the same, varying from model to model. Note that after the upgrade, unknown multicast groups may be flooded, and it is recommended to set Unknown Multicast Groups of IGMP Snooping and MLD Snooping to "Discard".

 

4. Increased the Circuit ID of DHCP Option 82 from 64 to 128 symbols.

 

5. Expanded the ERPS Ring ID from 1-8 to 1-255 available.

 

6. Added support for the CLI to display the DHCP lease times for IMPB binding entries learned by DHCP Snooping.

 

7. Expanded the description of hostname, port, interface to 128 symbols.

 

8. Upgraded SSH algorithms.

 

Firmware Download:

 

• Direct Download:

 

TL-SG3428MP(UN)_v2_2.0.12_20230302 (Beta)

Note: The above firmware is applied to TL-SG3428MP V2 and V2.6.

 

TL-SG3428MP(UN)_v3_3.0.8_20230302 (Beta)

Note: The above firmware is applied to TL-SG3428MP V3 and V3.6.

 

TL-SG3428MP(UN)_v5_5.0.5_20230302 (Beta)

Note: The above firmware is applied to TL-SG3428MP V5, V5.2, V5.6 and V5.26.

 

TL-SG3428MP(UN)_v6_6.0.3_20230302 (Beta)

Note: The above firmware is applied to TL-SG3428MP V6 and V6.6.

 

Updated on 21 Mar 2023:

 

Official release for TL-SG3428MP V2, V3, V5, V6 is now available.

Please check for updates via cloud or via the TP-Link Official Website manually.

 

TL-SG3428MP V2, V3, V5, V6 (official version):

 

TL-SG3428MP(UN)_V2_2.0.12 Build 20230302   Release Note >

TL-SG3428MP(UN)_V3_3.0.8 Build 20230302   Release Note >

TL-SG3428MP(UN)_V5_5.0.5 Build 20230302    Release Note >

TL-SG3428MP(UN)_V6_6.0.3 Build 20230302    Release Note >

 

 

 > Additional Notes < 

 

(1) The firmware upgrades for the wired products including Omada Controller, Router and Switch are universal, so you can download the firmware files from the global "EN" website or this forum to enjoy the new release. For wireless products such as Omada EAP, due to the limitation of local wireless laws and regulations, the firmware may be divided into different versions such as EU/US/CA/... , it's suggested to upgrade firmware from the local TP-Link official website accordingly.

 

(2) At present, only the new firmware release for the Omada Controller and Router will be continuously updated in this global "EN" forum. To get notified with the new release of Omada Controller, welcome to subscribe to Topic 245226. To get notified with the new release of Omada Routers, welcome to subscribe to Topic 255644. For other product lines, please check for updates via the Cloud or from the TP-Link official websites.

 

Feedback:

 

Any further feedback on the new firmware, please feel free to start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

-- Management mode (Controller or Standalone)

-- Device Model(s) and Hardware

-- Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support. See you in the forums soon!