STP Configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am attempting to confirm that I have STP properly configured with the following tp-link switches.
T2600G-52TS - Primary Switch - CIST Priority = 4096 (SONOS Music Players and Zappiti Media Players)
T2600G-28TS - Remote Switch #1 - CIST Priority = 8192 (SYNOLOGY DS1821+ NAS - Music and Movie Files)
TT2500G-10T - Remote Switch #2 - CIST Priority = 8192
TL-SG3210 - Remote Switch #3 - CIST Priority = 8192
1. SONOS requires STP which I have configured on all switches.
2. All switch ports that connected to the SONOS components are configured with STP Enabled and STP Path Cost = 10.
3. All interlink tp-link switch ports between the Primary and Remote Switches have STP Enabled and STP Patch Cost = 4.
4. All ports that have equipment connected that do NOT require STP have STP disabled in the switch configuration.
5. I have the CIST Priority configured as listed above. My goal is to insure that the T2600G-52TS is the ROOT BRIDGE. I am not sure if I have the CIST Priority configured correctly on the Remote Switches. Should each switch have a different priority.
I look forward to comments and suggestions about my configuration.
