Switch TL-SG2008P no statistic after upgrade fw
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
statistics for devices connected to the LAN switch have stopped being recorded after firmware update.
The network has a topology:
TL-R605 v1.0 1.0.1 Build 20210113 Rel.35074
TL-SG2008P v1.0 1.0.1 Build 20210407 Rel.54710
1. switch port - EAP245(EU) v3.0 5.0.2 Build 20210303 Rel. 34713
2. switch port - EAP225-Outdoor(EU) v1.0 5.0.3 Build 20210316 Rel. 67358
3. switch port - OC200 1.0 20210406 Rel.58757 con.ver. 4.3.5
next switch port TV, NAS, PC.
Thank for fix,
Pavel
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi All,
The switch no statistic issue has been reported to the R&D team who will make a beta firmware to fix the issue with high priority.
I'll update this post as soon as possible once the beta firmware is available.
@shberge no worries. The beta firmware for TL-SG2008P/TL-SG2210MP/TL-SG2428P will be provided shortly.
shberge wrote
Yes I would like a beta.
I have TL-SG2008P. TL-SG2210MP.Upgradet TL-SG2428P today and there is the same issue, so if you have a beta that fix to this switch also?
My problem switch is all of this type.
TL-SG2008P
TL-SG2210MP
TL-SG2428P
For the issue that the switch doesn't show traffic statistics after upgrading FW Build20210407, here is the beta firmware for you:
TL-SG2008P_v1_1.0.1_20210602 (Beta)
TL-SG2210MP_v1_1.0.1_20210604 (Beta)
TL-SG2428P_v1_1.1.1_20210604 (Beta)
Update on July 2nd, 2021:
Add the beta firmware for other switches mentioned here:
TL-SG2008_V3_20210702 (Beta)
TL-SG2218_V1_20210702 (Beta)
TL-SG2210P_V3.2_20210702 (Beta)
Update on August 10, 2021:
The official firmware has been released for the following models, which has fixed the traffic statistics issue:
TL-SG3452(UN)_V1_1.1.1 Build 20210531
TL-SG3452P(UN)_v1_1.1.1 Build 20210531
TL-SG3428(UN)_V1_1.1.1 Build 20210514
TL-SG3428MP(UN)_v1_1.1.1 Build 20210514
TL-SG2428P(UN)_V1_1.1.1 Build 20210514
TL-SG2218(UN)_V1_1.1.1 Build 20210514
Updated on August 27, 2021:
TL-SG2008(UN)_V4_4.0.1_20210806
TL-SG2008P(UN)_V1_1.0.2_20210806
TL-SG2008P(UN)_V2_2.0.1_20210806
TL-SG2210MP(UN)_V1_1.0.2_20210806
TL-SG2210MP(UN)_V2_2.0.1_20210806
TL-SG2210P(UN)_V3.2_3.20.2_20210806 (this also applies to hardware V3.0)
TL-SG2210P(UN)_V4_4.0.1_20210806
TL-SG3210(UN)_V3_3.0.2_20210806
Updated on September 6, 2021:
TL-SG2008(UN)_V3_3.0.2_20210806
Kind Note:
The Switch no statistics issue has been fixed by the latest official firmware, please check for updating.
For any other issues, please feel free to create a new topic by clicking Start a New Thread.
- Copy Link
- Report Inappropriate Content
Yes you are right, there is little or no logging on the new firmware, you also see this under insight and switch status and counter, here there is a lot that is not correct.
This is the same on all TL-SG2008P, my TL-SG2428P without new firmware have not this problem.
I downgraded to version 1.0 again, I can not see any improvements with this new firmware, rather it is a step backwards since statistics no longer work.
- Copy Link
- Report Inappropriate Content
@shberge Hello,
I want to downgrade firmware on previously version, but I dont know, where is possibility download it. I have this version now 1.0.1 Build 20210407 Rel.54710. Is the same version for US, EU etc.? I found only this site: https://www.tp-link.com/us/support/download/tl-sg2008p/#Firmware
Thank you,
Pavel
- Copy Link
- Report Inappropriate Content
I use this, I think it is the same in EU and US.
https://static.tp-link.com/2020/202007/20200714/TL-SG2008P(UN)_v1_20200608.zip
- Copy Link
- Report Inappropriate Content
@shberge Thank you, I downgraded firmware, all ok now.
- Copy Link
- Report Inappropriate Content
Same issue with both my SG2008P and SG2210MP, both switches got the latest firmware via omada at the same time.
- Copy Link
- Report Inappropriate Content
Hi All,
I've reported the problem to the developer team for checking.
barns5 wrote
Same issue with both my SG2008P and SG2210MP, both switches got the latest firmware via omada at the same time.
@barns5 Are you using Omada Controller v4.3.5? What's the current firmware version of your SG2210MP switch now?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yes I would like a beta.
I have TL-SG2008P. TL-SG2210MP.
Upgradet TL-SG2428P today and there is the same issue, so if you have a beta that fix to this switch also?
My problem switch is all of this type.
TL-SG2008P
TL-SG2210MP
TL-SG2428P
/shberge
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 14435
Replies: 61
Voters 0
No one has voted for it yet.