Configuring VOIP Vlan using SG2210MP and Oc200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Configuring VOIP Vlan using SG2210MP and Oc200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configuring VOIP Vlan using SG2210MP and Oc200
Configuring VOIP Vlan using SG2210MP and Oc200
2021-05-22 16:21:42

I m trying to create a voice vlan for a static ip using the omada controler but the guide in the site can't help me because  I can't find a QOS tab in the controler pages.

Till this point I have done the following:

Created a vlan called SIP

 

Enabled the vlan using the config tab of the switch

 

 

Changed the port 7 to SIP VLAN

 

And entered the port profile to do there changes

 

 

1. First of all the port profice doesn't save anything. Each time I enter it shows the default settings

2. Do I need to port forward the data from 1.20 ( the phone) to Wan1 Which is the providers Wan?

3. Do I need to do anything else?

 

I can\t find a QoS tab anywhere or the UOI config page that shows in the guide.

Thanks for your time.

 

 

 

  0      
  0      
#1
Options
6 Reply
Re:Configuring VOIP Vlan using SG2210MP and Oc200
2021-05-24 14:30:03

@NikosK 

 

The QoS is configured automatically, see popup information below.  

 

 

  0  
  0  
#2
Options
Re:Configuring VOIP Vlan using SG2210MP and Oc200
2021-05-24 15:03:06 - last edited 2021-05-24 15:06:10

 

I make these changes to the Vlan profile in order to make it tagged and enable LLDP MED. The problem is that the controler doesn't keep the changes. If I reenter the profile everything is reset to default. Any ideas?

 

 

 

 

  0  
  0  
#3
Options
Re:Configuring VOIP Vlan using SG2210MP and Oc200
2021-05-25 02:49:02

@NikosK 

 

Did you create a new port profile? You can't edit the profile that is automatically generated when you create the network.  

  0  
  0  
#4
Options
Re:Configuring VOIP Vlan using SG2210MP and Oc200
2021-05-25 18:12:25
  0  
  0  
#6
Options
Re:Configuring VOIP Vlan using SG2210MP and Oc200
2021-05-25 18:15:04
Yes, the SIP port profile is new and assigned to the port 7 as you can see from the pictures I posted. Port 1 is used to connect to the router. All other ports than 7 are in the All default profile
  0  
  0  
#7
Options
Re:Configuring VOIP Vlan using SG2210MP and Oc200
2021-05-25 19:24:14

@NikosK 

 

Your screen shot would show "edit profile" at the top if it was a new profile you created. You are trying to edit the profile the system automatically created from the SIP "network". That is why it won't save the profile changes. 

  0  
  0  
#8
Options