Hi everyone,

 

I would like to know if it´s possible make two separate lan network using TL-R605.

 

LAN 1 -> 192.168.40.1/24   ||  PORT 5 (the PORT that can only be LAN)

LAN 2 -> 192.168.50.1/24   ||  PORT 2 (For me can be any other, since receive a different address)

 

I´m using Omada Controller v4.2.8 to configure this equipment, one lan network.

 

Trying to make two separate lan networks I made the following configuration:

 

LAN 1

 

 

This LAN comes by default, the only thing that I changed was the Gateway Subnet, the all interfaces that are marked and  any of them can be unmarked, because the device returns a error message when I try to save 'The purpose of Default LAN cannot be modified.' 

 

Then I created another lan as follow:

 

LAN2

 

 

 

 

 

 

 

 

And that´s the profile of LAN Network configuration:

 

 

The configuration that I made didn´t work because all the all the lan ports of TL-R605 receive the address of LAN1 configuration.

 

 

The purpose of the configuration is to prevent devices connected to different LAN ports from communicating with each other.