Eap 225 v1 not supported in latest of omada OC200 v 3.0.10
Eap 225 v1 not supported in latest of omada OC200 v 3.0.10
Eap 225 v1 not supported in latest firmware update oc200 v3.0.10, we are running hotel business and have 10 devices that will not adopt and are pending status. We cannot afford buying new equipment every 2 years!
Is it at least possible to downgrade oc200 to previous version which worked ok ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Nek wrote
is it possible to downgrade my oc200 to previous version?
Yes, you can manually downgrade to v1.2.3. You need to locally log in (not through the cloud) to be able to do a manual downgrade:
- Copy Link
- Report Inappropriate Content
@Nek,
EAP225 V1 is indeed supported by Omada Controller v3.2.12 (the last version before SDN Controller v4.1.5).
No idea where you found firmware v3.0.10 as the latest version.
Only OC200 Omada Controller versions I know of before it became SDN Controller are:
OC200 version |
Corresponds to |
---|---|
v1.1.0 |
v3.1.4 |
v1.1.1 |
v3.1.13 |
v1.2.0 |
v3.2.4 |
v1.2.1 |
v3.2.5 |
v1.2.3 |
v3.2.12 |
All those versions support EAP225 V1:
First, upgrade OC200 manually to this firmware (it's OC200 firmware v1.2.3). Do not upgrade to firmware v1.7.0/Controller v4.1.5!
If the EAPs still can't be adopted, I suggest to do a hard reset of the EAPs and try again.
Also be patient when waiting for the EAP to go into »Pending« state: with old EAP firmware it needs an eternity or two.
Next, make sure you upgrade EAP225 V1 to its latest firmware version v1.4.0 found here. You can do this with Omada Controller, but it will need a manual upgrade. Online upgrade won't work if your EAP225 firmware is too old (e.g. if it is v1.0.0).
- Copy Link
- Report Inappropriate Content
Forgive me my mistake i meant to say it is not included in latest update SDN oc200, 14/7/2020, to my regrets i have updated oc200 to v 1.7.0 i only looked that it covered eap225 not paying attention to version so i screwed up, is it possible to downgrade my oc200 to previous version? If i can do this at least i can get them adoptrd again and working.
Regarding the access points I have already updated to eap225 v1 to the latest 1.4, and plugged them in and out and hard reset and all the here and there tricks 😂
- Copy Link
- Report Inappropriate Content
Nek wrote
is it possible to downgrade my oc200 to previous version?
Yes, you can manually downgrade to v1.2.3. You need to locally log in (not through the cloud) to be able to do a manual downgrade:
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Nek wrote
How do i access locally? Do i have i install omada controller software on my computer?
No. You start a web browser on your laptop/PC, type the OC200's IP address in the address field and log into the web UI.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Nek , you're welcome. Glad I could help.
- Copy Link
- Report Inappropriate Content
Thanks for the thread. I was about to return this OC200 back to Amazon and stick to my original Omada deployment. It is _unacceptable_ that TP-Link drops support for one of their relatively recent products. I have EAP245 v1s and v3s and they work great.
Also, the fun part - the upgrade process is the most unprofessionally done one I have ever seen. "Incompatible....backup your configuration". And then when you are done, you discover that you are stuck.
I have downgraded the firmware and luckily (for TP-Link), by APs are back.
This was the LAST TP-Link product I bought and I will NEVER recommend anyone I know to even consider their products - for business or home use.
Give me just 5 minutes to put one star on Amazon....
- Copy Link
- Report Inappropriate Content
Yeah it sucks that they drop firmware updates for business products not very old. The forum though is fantastic i have found all answer s to my questions !
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 5912
Replies: 11