WAN port IP Addreass

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WAN port IP Addreass

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WAN port IP Addreass
WAN port IP Addreass
2019-06-27 17:46:23 - last edited 2021-04-19 12:07:25
Model: TL-R600VPN  
Hardware Version: V4
Firmware Version:

Quick question;  Can I assign a private IP address to the WAN port of the TL-R600VPN router?

 

MY plan is to place this router between my company's private network and a seperate private network with a PLC, VFD & HMI Monitor to keep the constant traffic from the PLC seperate from our company's network.

 

I would use a 1:1 NAT table of static IP addresses to communicate with the PLC components when programming or pulling data from the PLC.  10. addresses on the company side & 192. addresses on the machine (PLC) side.

  0      
  0      
#1
Options
2 Reply
Re:WAN port IP Addreass
2019-06-28 06:33:51 - last edited 2021-04-19 12:07:25

lhwidget wrote

Quick question;  Can I assign a private IP address to the WAN port of the TL-R600VPN router?

 

MY plan is to place this router between my company's private network and a seperate private network with a PLC, VFD & HMI Monitor to keep the constant traffic from the PLC seperate from our company's network.

 

I would use a 1:1 NAT table of static IP addresses to communicate with the PLC components when programming or pulling data from the PLC.  10. addresses on the company side & 192. addresses on the machine (PLC) side.

 

Of course you can assign a private IP address to the WAN port of the TL-R600VPN router. It only requires that WAN IP is in the different subnet with LAN IP.

  0  
  0  
#2
Options
Re:Re:WAN port IP Addreass
2019-06-28 13:07:11 - last edited 2021-04-19 12:07:25

I thought so, thanks for confirming!

 

Sincerely,

Jay

  0  
  0  
#3
Options